AT86RF231-ZFR Atmel, AT86RF231-ZFR Datasheet - Page 96

• Manufacturer Part Number: AT86RF231-ZFR
• Description: TXRX LOW POWER 2.4GHZ 32VQFN
• Manufacturer: Atmel

Specifications of AT86RF231-ZFR

• Frequency: 2.4GHz
• Data Rate - Maximum: 2Mbps
• Modulation Or Protocol: 802.15.4 Zigbee, 6LoWPAN, RF4CE, SP100, WirelessHART™, ISM
• Applications: Industrial Monitoring and Control, Wireless Alarm and Security Systems
• Power - Output: -17dBm ~ 3dBm
• Sensitivity: -101dBm
• Voltage - Supply: 1.8 V ~ 3.6 V
• Current - Receiving: 12.3mA
• Current - Transmitting: 14mA
• Data Interface: PCB, Surface Mount
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-VQFN Exposed Pad, 32-HVQFN, 32-SQFN, 32-DHVQFN
• Number Of Receivers: 1
• Number Of Transmitters: 1
• Wireless Frequency: 2405 MHz to 2480 MHz
• Interface Type: SPI
• Noise Figure: 6 dB
• Output Power: 20 dB
• Operating Supply Voltage: 1.8 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Maximum Supply Current: 12.3 mA
• Minimum Operating Temperature: - 40 C
• Modulation: OQPSK
• Protocol Supported: 802.15.4
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Memory Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: AT86RF231-ZFR; AT86RF231-ZFRTR

8111C–MCU Wireless–09/09
Table 8-9.
Note:
It is recommended to perform CCA measurements in RX_ON state only. To avoid switching
accidentally to BUSY_RX state the SHR detection can be disabled by setting register bit
RX_PDT_DIS (register 0x15, RX_SYN), refer to
receiver remains in RX_ON state to perform a CCA measurement until the register bit
RX_PDT_DIS is set back to continue the frame reception. In this case the CCA measurement
duration is 8 symbol periods.
3
0
1. After receiving the SHR an automated ED measurement is started with a length of 8 symbol
periods (PSDU rate 250 kb/s), refer to
automated ED measurement must be finished to provide a result for the CCA measurement.
Only one automated ED measurement per frame is performed.
CCA Measurement Period and Access in BUSY_RX state
Carrier sense with Energy above threshold (AND).
CCA result is available after finishing
automated ED measurement period.
Carrier sense with Energy above threshold (OR).
CCA result is available after finishing
automated ED measurement period
Section 8.4 “Energy Detection (ED)” on page
Section 9.1 “Receiver (RX)” on page
CCA result is immediately available after
request.
CCA result is immediately available after
request.
AT86RF231
101. The
91. This
96