XR16L580IM-F Exar Corporation, XR16L580IM-F Datasheet - Page 13
![IC UART FIFO 16B 48TQFP](/photos/16/10/161019/tqfp-48_sml.jpg)
XR16L580IM-F
Manufacturer Part Number
XR16L580IM-F
Description
IC UART FIFO 16B 48TQFP
Manufacturer
Exar Corporation
Datasheet
1.XR16L580IL24TR-F.pdf
(52 pages)
Specifications of XR16L580IM-F
Number Of Channels
1, UART
Package / Case
48-TQFP
Features
*
Fifo's
16 Byte
Protocol
RS232, RS422
Voltage - Supply
2.25 V ~ 5.5 V
With Auto Flow Control
Yes
With Irda Encoder/decoder
Yes
With False Start Bit Detection
Yes
With Modem Control
Yes
With Cmos
Yes
Mounting Type
Surface Mount
Data Rate
3.125 Mbps
Supply Voltage (max)
5.5 V
Supply Voltage (min)
2.25 V
Supply Current
2 mA
Maximum Operating Temperature
+ 85 C
Minimum Operating Temperature
- 40 C
Mounting Style
SMD/SMT
No. Of Channels
1
Uart Features
Selectable RX And TX FIFO Trigger Levels, Automatic Software Flow Control, Complete Modem Interface
Supply Voltage Range
2.25V To 5.5V
Rohs Compliant
Yes
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
XR16L580IM-F
Manufacturer:
Exar Corporation
Quantity:
10 000
Part Number:
XR16L580IM-F
Manufacturer:
EXAR/艾科嘉
Quantity:
20 000
F
REV. 1.4.1
The transmitter section comprises of an 8-bit Transmit Shift Register (TSR) and 16 bytes of FIFO which
includes a byte-wide Transmit Holding Register (THR). TSR shifts out every data bit with the 16X internal
clock. A bit time is 16 clock periods. The transmitter sends the start-bit followed by the number of data bits,
inserts the proper parity-bit if enabled, and adds the stop-bit(s). The status of the FIFO and TSR are reported in
the Line Status Register (LSR bit-5 and bit-6).
The transmit holding register is an 8-bit register providing a data interface to the host processor. The host
writes transmit data byte to the THR to be converted into a serial data stream including start-bit, data bits,
parity-bit and stop-bit(s). The least-significant-bit (Bit-0) becomes first data bit to go out. The THR is the input
register to the transmit FIFO of 16 bytes when FIFO operation is enabled by FCR bit-0. Every time a write
operation is made to the THR, the FIFO data pointer is automatically bumped to the next sequential data
location.
The host loads transmit data to THR one character at a time. The THR empty flag (LSR bit-5) is set when the
data byte is transferred to TSR. THR flag can generate a transmit empty interrupt (ISR bit-1) when it is enabled
by IER bit-1. The TSR flag (LSR bit-6) is set when TSR becomes completely empty.
The host may fill the transmit FIFO with up to 16 bytes of transmit data. The THR empty flag (LSR bit-5) is set
whenever the FIFO is empty. The THR empty flag can generate a transmit empty interrupt (ISR bit-1) when the
amount of data in the FIFO falls below its programmed trigger level. The transmit empty interrupt is enabled by
IER bit-1. The Transmitter Empty Flag (LSR bit-6) is set when both the TSR and the FIFO become empty.
2.10
2.10.1
2.10.2
2.10.3
IGURE
8. T
Transmitter
Transmit Holding Register (THR) - Write Only
Transmitter Operation in non-FIFO Mode
Transmitter Operation in FIFO Mode
RANSMITTER
16X Clock
O
PERATION IN NON
Data
Byte
SMALLEST 2.25V TO 5.5V UART WITH 16-BYTE FIFO AND POWERSAVE
Transmit Shift Register (TSR)
-FIFO M
Transmit
Register
Holding
(THR)
ODE
13
THR Interrupt (ISR bit-1)
Enabled by IER bit-1
M
S
B
TXNOFIFO1
L
S
B
XR16L580