MPC8536BVTATH Freescale Semiconductor, MPC8536BVTATH Datasheet - Page 54

• Manufacturer Part Number: MPC8536BVTATH
• Description: Microprocessors (MPU) 8536 INDUSTRIAL 1250
• Manufacturer: Freescale Semiconductor

Specifications of MPC8536BVTATH

• Processor Series: MPC85xx
• Core: e500
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 1250 MHz
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Interface Type: I2C, SPI, UART
• Minimum Operating Temperature: 0 C
• Package / Case: FCPBGA-783
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Ethernet: Enhanced Three-Speed Ethernet (eTSEC), MII Management
When operating in SGMII mode, the eTSEC EC_GTX_CLK125 clock is not required for this port. Instead, SerDes reference
clock is required on SD2_REF_CLK and SD2_REF_CLK pins.
2.9.3.1
The characteristics and DC requirements of the separate SerDes reference clock are described in
Serial Interfaces.”
2.9.3.2
Table 38
not intended to be used with, and should not be clocked by, a spread spectrum clock source.
Notes:
1. 8 ns applies only when 125 MHz SerDes2 reference clock frequency is selected via cfg_srds_sgmii_refclk during POR.
2. In a frequency band from 150 kHz to 15 MHz, at BER of 10E-12.
3. Total peak-to-peak deterministic jitter “Dj” should be less than or equal to 50 ps.
54
Symbol
t
t
REFCJ
REFPJ
t
REF
lists the SGMII SerDes reference clock AC requirements. Please note that SD2_REF_CLK and SD2_REF_CLK are
REFCLK cycle time
REFCLK cycle-to-cycle jitter. Difference in the period of any two adjacent
REFCLK cycles
Phase jitter. Deviation in edge location with respect to mean edge location
DC Requirements for SGMII SD2_REF_CLK and SD2_REF_CLK
AC Requirements for SGMII SD2_REF_CLK and SD2_REF_CLK
MPC8535E PowerQUICC III Integrated Processor Hardware Specifications, Rev. 3
Table 38. SD2_REF_CLK and SD2_REF_CLK AC Requirements
Parameter Description
Min
–50
—
—
Typical
10 (8)
Section 2.20, “High-Speed
—
—
Freescale Semiconductor
Max
100
50
—
Units Notes
ns
ps
ps
2,3
—
1