PIC18F2221-E/SS Microchip Technology, PIC18F2221-E/SS Datasheet - Page 10

• Manufacturer Part Number: PIC18F2221-E/SS
• Description: 4KB, Flash, 512bytes-RAM, 25I/O, 8-bit Family,nanoWatt 28 SSOP .209in TUBE
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F2221-E/SS

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 25
• Program Memory Size: 4KB (2K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 10x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 28-SSOP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PIC18F2221/2321/4221/4321 FAMILY
1.2
• Memory Endurance: The Enhanced Flash cells
• Self-Programmability: These devices can write to
• Extended Instruction Set: The PIC18F2221/
• Enhanced CCP Module: In PWM mode, this
• Enhanced Addressable USART: This serial
• 10-Bit A/D Converter: This module incorporates
• Extended Watchdog Timer (WDT): This
DS39689F-page 10
for both program memory and data EEPROM are
rated to last for many thousands of erase/write
cycles – up to 100,000 for program memory and
1,000,000 for EEPROM. Data retention without
refresh is conservatively estimated to be greater
than 40 years.
their own program memory spaces under internal
software control. By using a bootloader routine,
located in the protected Boot Block at the top of
program memory, it becomes possible to create an
application that can update itself in the field.
2321/4221/4321 family introduces an optional
extension to the PIC18 instruction set, which adds
8 new instructions and an Indexed Addressing
mode. This extension, enabled as a device con-
figuration option, has been specifically designed
to optimize re-entrant application code originally
developed in high-level languages, such as C.
module provides 1, 2 or 4 modulated outputs for
controlling half-bridge and full-bridge drivers.
Other features include auto-shutdown, for
disabling PWM outputs on interrupt or other select
conditions and auto-restart, to reactivate outputs
once the condition has cleared.
communication module is capable of standard
RS-232 operation and provides support for the
LIN/J2602 bus protocol. Other enhancements
include automatic baud rate detection and a 16-bit
Baud Rate Generator for improved resolution.
When the microcontroller is using the internal
oscillator block, the EUSART provides stable
operation for applications that talk to the outside
world without using an external crystal (or its
accompanying power requirement).
programmable acquisition time, allowing for a
channel to be selected and a conversion to be
initiated without waiting for a sampling period and
thus, reducing code overhead.
Enhanced version incorporates a 16-bit prescaler,
allowing an extended time-out range that is stable
across operating voltage and temperature. See
Section 27.0 “Electrical Characteristics” for
time-out periods.
Other Special Features
diagrams for the two groups are shown in Figure 1-1 and
1.3
Devices in the PIC18F2221/2321/4221/4321 family are
available in 28-pin and 40/44-pin packages. Block
Figure 1-2.
The devices are differentiated from each other in five
ways:
1.
2.
3.
4.
5.
All other features for devices in this family are identical.
These are summarized in Table 1-1.
The pinouts for all devices are listed in Table 1-2 and
Table 1-3.
Like all Microchip PIC18 devices, members of the
PIC18F2221/2321/4221/4321 family are available as
both standard and low-voltage devices. Standard
devices with Enhanced Flash memory, designated with
an “F” in the part number (such as PIC18F2321),
accommodate an operating V
Low-voltage parts, designated by “LF” (such as
PIC18LF2321), function over an extended V
of 2.0V to 5.5V.
Flash
PIC18F2221/4221
PIC18F2321/4321).
A/D channels (10 for 28-pin devices, 13 for
40/44-pin devices).
I/O ports (3 bidirectional ports on 28-pin devices,
5 bidirectional ports on 40/44-pin devices).
CCP and Enhanced CCP implementation
(28-pin devices have 2 standard CCP
CCP module and one ECCP module).
Parallel Slave Port (present only on 40/44-pin
devices).
modules, 40/44-pin devices have one standard
Details on Individual Family
Members
program
© 2009 Microchip Technology Inc.
memory
devices,
DD
range of 4.2V to 5.5V.
(4
8
Kbytes
Kbytes
DD
range
for
for