FX1S-30MR-ES/UL MITSUBISHI, FX1S-30MR-ES/UL Datasheet - Page 361

• Manufacturer Part Number: FX1S-30MR-ES/UL
• Description: PLC, 16 IN, 14 RELAY OUT, 110V/2
• Manufacturer: MITSUBISHI

Specifications of FX1S-30MR-ES/UL

• No. Of Analogue Inputs: 16
• No. Of Analogue Outputs: 14
• Ip/nema Rating: IP10
• Approval Bodies: CE, CUL, UL
• External Depth: 49mm
• External Length / Height: 90mm
• External Width: 60mm
• Mounting Type: Panel

10.19 Using the FX
10.19.1 Outline of functions.
FX Series Programmable Controllers
The display module, FX
FX
Symbols in the 5DM refer to;
X: Input, Y: Output, M: Auxillary relay, S: State, T: Timer, C: Counter, D: Data register.
Operator functions: The following functions can be used only from the operation keys on the
front of the 5DM. (Refer to the 5DM Hardware manual for the correct procedure when using
the operation keys).
5DM Control functions: The following functions can be used only when controlled by the
sequence programs.
If a key word to prohibit read or write is registered in the PLC, only the clock time display is
available. All other functions shown above are not.
If an operation is performed in this state, the display flickers for 5 seconds.
Clock
Device monitor
Buffer memory monitor
Error display
Forced Set / Reset
T/C reset
Data change
Protect
Specified device monitor
Error display enable / disable
Auto backlight OFF
Operation key status recognition
1N
PLC, allowing devices to be monitored, and data settings changed.
Function
Function
Display
Setting
Bit device
Word device (16-bit)
Word device (32-bit)
Current value
Set value
1N
-5DM Display module.
1N
-5DM (hereafter refered to as 5DM) can be mounted on an FX
Enables either, all operator functions, only monitor
function, or only clock time display.
Allows user to specify device type and number to be
displayed
Enables or Disables the error display function
Sets the automatic backlight off time
Recognised the ON/OFF status of the four operation
keys
Displays built-in RTC of FX
Allows the setting of - Year, month, day, hour and minute.
Displays the ON / OFF status of X, Y, M & S
Displays the current values of T, C & D. Allows setting of T & C
Displays the current values of 32bit C & D. Allows setting of 32bit C
Displays the buffer memory of special units and blocks (FX
Displays Error codes and error occurance step number
Forces ON or OFF bit devices Y, M & S
Clears the current values of T & C
Allows the changing of current values in T, C and D
Allows the changing of set values in T, & C
Description
1N
Description
/ FX
1S
Points Of Technique 10
10-29
Section
1N
only)
1S
or