TLA21000 Red Lion Controls, TLA21000 Datasheet - Page 14

• Manufacturer Part Number: TLA21000
• Description: Form-C Limit Relay W/1 Alarm
• Manufacturer: Red Lion Controls
• Type: Temperaturer

Specifications of TLA21000

• Brand/series: TLA Series
• Contact Form: SPST/SPDT
• Dimensions: 49.5mmW×49.5mmH×115.3mmD
• Enclosure Rating: IP65
• Input Type: RTD/Thermocouple
• Ip Rating: IP65
• Memory: EEPROM
• Mounting Type: Panel
• Number Of Outputs: 1
• Output Type: Relay
• Power, Rating: 8 VA
• Primary Type: Controller
• Special Features: EEPROM
• Standards: cURus, CE, FM
• Temperature, Ambient: 0 to +50 °C (Max.)
• Termination: Screw
• Voltage, Rating: 120⁄240 VAC
• Voltage, Supply: 85 to 250 VAC
• Panel Cutout: 1.77" × 1.77" (1⁄16 DIN)
• Power Requirements: 85-250 VAC
• Sealing: NEMA 4X/IP65
• Operating Temperature: 0°C to +50°C
• Lead Free Status / Rohs Status: RoHS Compliant part

Replacing Output Board
1. Remove the bezel assembly.
2. Lift up on the top bezel board latch while gently pulling out on the bezel/
3. Remove the output board by pulling it away from the other boards. Replace
4. Connect the bezel/ display board assembly by guiding the board ends into the
Form-A Limit Relay with 2 Alarms
Form-C Limit Relay with 1 Alarm
8.0 I
9.0 T
The TLA is supplied with an output board installed.
display board assembly. Do NOT remove the display board from the bezel.
the output board by aligning the board to board connector. Be certain the
connector is fully mated.
bezel latches. Slide the assembly on evenly until the display board connector
is completely engaged and bezel latches are fully seated onto the boards.
NSTALLING AN
ERMINAL
AC Models
C
ONFIGURATIONS
O
UTPUT
B
OARD
14
Form-A Limit Relay with 2 Alarms
Form-C Limit Relay with 1 Alarm
DC Models