HW-USB-IIG Xilinx Inc, HW-USB-IIG Datasheet - Page 6

• Manufacturer Part Number: HW-USB-IIG
• Description: IC CABLE
• Manufacturer: Xilinx Inc

Specifications of HW-USB-IIG

• Supply Voltage: 5.25V
• Accessory Type: Platform Cable USB II
• Ic Cable Type: Download Cable
• Connector Type B: USB A Plug
• Connector Type A: 2-mm Shrouded Keyed Socket
• Silicon Family Name: Virtex II, Spartan II
• Core Architecture: FPGA
• Core Sub-architecture: Virtex, Spartan, XC4000
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Platform Cable USB II
X-Ref Target - Figure 4
DS593_04_021408
Figure 4: iMPACT (9.2i) Output Pull-Down Menu
Option 2: Manual Cable Connect
To manually connect the cable, select Output → Cable Setup. Select the Xilinx USB Cable radio button in the Cable
Communication Setup dialog box
(Figure
5).
X-Ref Target - Figure 5
DS593_05_021408
Figure 5: iMPACT (10.1) Cable Communication Setup
It is necessary to perform a cable disconnect when switching from Boundary Scan or Direct SPI Configuration mode to
Slave-Serial mode, or vice versa. iMPACT can be disconnected from the cable using Output → Cable Disconnect
6). After the mode switch is complete, reestablish the cable connection using the Output → Cable Setup
(Figure 4, page
dialog. It is not necessary, however, to perform a cable disconnect when switching between Boundary-Scan and Direct SPI
Configuration modes.
DS593 (v1.2.1) March 17, 2011
www.xilinx.com
6