8845A/SU 120V Fluke Electronics, 8845A/SU 120V Datasheet - Page 64

• Manufacturer Part Number: 8845A/SU 120V
• Description: PREC MLTMTR DMM BNCH 6.5 DIG RES
• Manufacturer: Fluke Electronics
• Type: Digital (DMM)r

Specifications of 8845A/SU 120V

• Includes: Test Leads
• Style: Bench
• Display Digits: 6.5
• Display Type: VFD, Dual
• Display Count: Varies
• Function: Voltage, Current, Resistance, Frequency
• Functions, Extra: Continuity, dB, Diode Test
• Features: Memory, RS-232
• Ranging: Manual
• Response: Average
• Lead Free Status / RoHS Status: Contains lead / RoHS compliant by exemption
• Other names: 2675292; 614-1001

8845A/8846A
Users Manual
3-22
Removing the Power-up Configuration
Recalling a Meter Configuration
Managing Memory
To remove the Meter’s stored power-up configuration:
4. Press M.
5. Press the STORE CONFIG softkey.
6. Press the REMOVE POWER-UP softkey.
After removing the power-up configuration, power the Meter down and back up using the
rear-panel power switch to restore factory default settings.
To recall a configuration from internal memory:
1. Press M.
2. Press the RECALL CONFIG soft key.
3. Press the RECALL INT MEM soft key.
4. Press the soft key labeled with the memory location (CONFIGA through
To recall a configuration from external memory (8846A Only):
1. Press M.
2. Press the RECALL CONFIG soft key.
3. Press the RECALL USB soft key.
4. To recall the Meter configuration from one of the first four memory locations, press
5. To select the memory location, press either <-- or --> to select a specific digit.
6. Once the chosen memory location is set, press the ENTER soft key to recall that
The Meter provides a method of clearing internal memory and displaying the status of
external memory (8846A Only). Per Department of Defense requirements, the Meter
allows the erasure of Meter configuration and data files from external USB memory
modules. Other files are not erased from the modules.
Incompatible configurations (from incompatible configuration versions)
will not be loaded, but will generate error +229 "Incompatible
measurement configuration not loaded".
CONFIGE).
The Meter labels the first four soft keys with the first four memory locations
CONFIG01 through CONFIG04. The fifth soft key is labeled MORE to allow
access to all 100 memory locations.
the appropriately labeled soft key. If you want a memory location other than the first
four locations, press the MORE soft key.
The display indicates the last memory location containing a Meter configuration. If
all configuration memory locations are filled, the Meter will always indicate memory
location 10.
With the digit selected, press the soft key labeled -- to decrement the digit or ++ to
increment the digit.
Meter configuration.
Note