8845A/SU 120V Fluke Electronics, 8845A/SU 120V Datasheet - Page 81

• Manufacturer Part Number: 8845A/SU 120V
• Description: PREC MLTMTR DMM BNCH 6.5 DIG RES
• Manufacturer: Fluke Electronics
• Type: Digital (DMM)r

Specifications of 8845A/SU 120V

• Includes: Test Leads
• Style: Bench
• Display Digits: 6.5
• Display Type: VFD, Dual
• Display Count: Varies
• Function: Voltage, Current, Resistance, Frequency
• Functions, Extra: Continuity, dB, Diode Test
• Features: Memory, RS-232
• Ranging: Manual
• Response: Average
• Lead Free Status / RoHS Status: Contains lead / RoHS compliant by exemption
• Other names: 2675292; 614-1001

Measuring Capacitance (8846A only)
2. Press K.
3. With the test leads connected to the 400 mA and Input LO connectors, press the €A
4. Apply power to the measured circuit and read the current in the Meter’s display.
Function modifiers:
The Fluke 8846A is capable of measuring capacitance from 1 pF to 100 mF (0.1 F).
To make a capacitance measurement:
1. Press C. An example of the capacitance display is shown below.
soft key as shown above, if not already highlighted. If the test leads are connected to
the 10A and Input LO connectors, then press the 10A soft key.
Filter
2ND MEAS Cycles the secondary display through the measurement functions
F1
F1
3HZ SLOW Provides higher measurement accuracy on ac signals
20HZ
200HZ
Displays the filter menu. For best accuracy and stable readings,
choose a filter based on the lowest frequency to be measured and the
accuracy needed.
listed below, and then off. When a second measurement function is
selected, the 2ND MEAS soft key label is highlighted.
Frequency - Displays the frequency of the ac signal on the Meter’s
current connectors (Input Lo and 400 ma or 10A) connectors.
IDC - Displays the dc current the ac signal is riding on.
0.0333
F2
F2
0.000
between 3 Hz and 20 Hz. However, the measurement
cycle time is longer than it is when using the 20 Hz
filter.
Provides higher measurement accuracy on ac signals
between 20 Hz and 200 Hz. However, the measurement
cycle time is longer than it is when using the 200 Hz
filter.
Provides accurate measurements on ac signals 200 Hz
and above.
F3
F3
F4
F4
uA
nF
~
F5
F5
Measuring Capacitance (8846A only)
Making Measurements
caw08f.eps
caw10f.eps
4-13