DRT2-ID32BV-1 Omron, DRT2-ID32BV-1 Datasheet - Page 20

• Manufacturer Part Number: DRT2-ID32BV-1
• Description: 32 In Vert MIL Connector PNP
• Manufacturer: Omron

Specifications of DRT2-ID32BV-1

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Application Precautions
• Do not apply voltages or connect loads to the Output Units in excess of
• Do not apply voltages to the Input Units in excess of the rated value.
• After replacing a CPU Unit or Special I/O Unit, resume operation only
• Check the user program for proper execution before actually running it
• Observe the following precautions when wiring the communications
• Confirm that the system will not be adversely affected before performing
• Before touching a Unit, be sure to first touch a grounded metallic object in
• When replacing parts, such as a relay, make sure the replacement part
• Be sure that metal filings do not enter the Unit when wiring or installing.
• Use correct parts for wiring.
• Use the specified communications cables and connectors.
• Always enable the scan list before operation.
• Before clearing the scan list of a Unit that has user-allocated remote I/O,
• When adding a new node to the network, check that the new node’s baud
• Do not extend connection distances beyond the ranges given in the spec-
• Although the Environment-resistive Slaves have IP67 enclosure ratings,
the maximum switching capacity.
after transferring to the new CPU Unit or Special I/O Unit the contents of
the DM Area, HR Area, and other data required for resuming operation.
with the system.
cables.
the following operations.
order to discharge any static build-up.
has the correct specifications.
always confirm that no errors occur after the I/O Area setting is changed
to fixed allocation.
rate is the same as the baud rate set on the other nodes.
ifications.
do not used them in applications where the Slave is always submerged in
water.
• Wire the communications cables separately from the power lines or
• Do not bend the communications cables excessively.
• Do not pull on the communications cables excessively.
• Do not place objects on top of the communications cables.
• Route communications cables inside ducts.
• Changing the operating mode of the PLC
• Setting/resetting any bit in memory
• Changing the present value of any word or any set value in memory
high-tension lines.
xxi
5