DRT2-ID32BV-1 Omron, DRT2-ID32BV-1 Datasheet - Page 428

• Manufacturer Part Number: DRT2-ID32BV-1
• Description: 32 In Vert MIL Connector PNP
• Manufacturer: Omron

Specifications of DRT2-ID32BV-1

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Offset Compensation
Setting Using the DeviceNet Configurator
Temperature Input Terminals
1,2,3...
Note
Note The offset value can be set even when using default scaling.
Lower limit 8000 hex (−32768)
Upper limit 7FFE hex
100% scaling value (32766)
( − 28,000 to 28,000) for two points in the scale (the 100% value and 0%
value).
1. The default values are 0 and 28,000.
2. Reverse scaling, where the 0% scaling value is higher than the 100% scal-
The scaling function is equipped with offset compensation, which can com-
pensate for any error that occurs during scaling. The offset amount is added
to the scaled line as shown in the following diagram. The offset (error) value
can be input between
overflow does not occur. The High Limit is 7FFE hex and the Low Limit is
8000 hex.
1. Double-click the icon of the Temperature Input Terminal to be set in the
Value for 100% set by user
(Scaling point 2)
Value for 0% set by user
(Scaling point 1)
ing value, is also supported.
Main Window and open the Edit Device Parameters Window. (From the
Maintenance Mode Window, click the right mouse button over the Slave
icon and select Parameters and Edit.)
0% scaling
Scaling value
–
28,000 to 28,000, but make sure that underflow or
0%
Conversion
0%
1
Offset value
(–28,000 to
28,000)
00%
100%
Input signal range
Input signal range
Section 7-6
Scaled line
407