1141A AGILENT TECHNOLOGIES, 1141A Datasheet - Page 19

• Manufacturer Part Number: 1141A
• Description: Differential Oscilloscope Probe
• Manufacturer: AGILENT TECHNOLOGIES

Specifications of 1141A

• Bandwidth: 200MHz
• For Use With: Agilent Technologies 6000 & DSO5000 Series Oscilloscopes
• Lead Free Status / RoHS Status: na

Wedge Probe Adapters
• Easy connection to surface
• Safe, with no chance of shorting
• Mechanically non-invasive contact
• 3-, 8-, and 16-signal versions
• Supports 0.5 and 0.65-mm
Problem-free probing
The Agilent wedge probe adapter
eliminates many of the frustrations
associated with probing surface
mount components. If you’ve ever
accidentally shorted IC pins together,
experienced electrical and/or
mechanical problems with soldering
small wires onto leads, or gotten
frustrated juggling multiple probes
while you’re trying to operate your
scope, the Wedge was designed with
you in mind.
Make the inaccessible
accessible
When you use the Wedge, you don’t
have to worry about shorting IC pins
together on a delicate component–or
worse yet on an irreplaceable
prototype. The Wedge is easy to
insert and it stays put. There’s no
need to solder small wires onto
leads. The Wedge is mechanically
non-invasive, so you won’t damage
the legs of the IC. Instead, you’ll
have easy access to hard-to-reach
components.
Electrical reliability
The Wedge makes two contact
points with each leg of the IC. This
redundant physical connection
increases the electrical reliability of
the connection. And the Wedge’s low
capacitance and inductance provides
superior performance to many other
alternatives.
mount ICs
TQFP and PQFP packages
The wedge probe adapter connects
directly to 1145A/1155A active
probes and the dual lead adapter
provided with the 1160A-65A passive
probe family and N2877A/N2879A
accessory kits for use with N287xA
Series passive probes.
IC clip kits
An inexpensive solution for probing
fine-pitch ICs, the 10072A SMT Kit
includes 10 IC clips and 2 dual-lead
adapters that connect the clips
directly to 10070-family probes.
The 10075A 0.5-mm IC clip kit is ideal
for connecting to IC’s as fine as
0.5 mm. The clip body allows many
clips to be mounted side-by-side. The
kit includes four 0.5-mm IC clips and
two dual-lead adapters that connect
the IC clips directly to 10070-family
probes.
Agilent Wedge electrical
characteristics
Operating
voltage
Operating
current
Capacitance
between
contacts
< 40 Vdc + peak ac
0.5 A maximum
2 pF typical (all except
Agilent-E2643A/44A)
4.33 pF typical at 1 MHz
(Agilent-E2643A/44A)
19
Ordering information
Self-
inductance
Cross
coupling
Contact
resistance
E2613A
E2613B
E2614A
E2643A
E2615A
E2615B
E2616A
E2644A
10072A
10075A
0.5 mm Wedge probe
adapter, 3 signal, qty 1
0.5 mm Wedge probe
adapter, 3 signal, qty 2
0.5 mm Wedge probe
adapter, 8 signal, qty 1
0.5 mm Wedge probe
adapter, 16 signal, qty 1
0.65 mm Wedge probe
adapter, 3 signal, qty 1
0.65 mm Wedge probe
adapter, 3 signal, qty 2
0.65 mm Wedge probe
adapter, 8 signal, qty 1
0.65 mm Wedge probe
adapter, 16 signal, qty 1
SMT kit for 10070 probe
family
0.5 mm IC clip kit
15 nH typical (all except
Agilent E2643A/44A)
37 nH typical at 1 MHz
(Agilent E2642A/44A)
-31 dB typical at 100 MHz
(Agilent E2643A/44A)
< 0.1 Ω