ISP1504CBS NXP Semiconductors, ISP1504CBS Datasheet - Page 2

• Manufacturer Part Number: ISP1504CBS
• Description: RF Transceiver USB2.0 ULPI OTG TRANSCEIVER
• Manufacturer: NXP Semiconductors

Specifications of ISP1504CBS

• Operating Supply Voltage: 1.65 V to 3.6 V
• Mounting Style: SMD/SMT
• Package / Case: HVQFN
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: ISP1504CBS,157

1. General description
2. Features
The ISP1504 is a Universal Serial Bus (USB) On-The-Go (OTG) transceiver that is fully
compliant with Universal Serial Bus Specification Rev. 2.0 , On-The-Go Supplement to the
USB 2.0 Specification Rev. 1.3 and UTMI+ Low Pin Interface (ULPI) Specification
Rev. 1.1 .
The ISP1504 can transmit and receive USB data at high-speed (480 Mbit/s), full-speed
(12 Mbit/s) and low-speed (1.5 Mbit/s), and provides a pin-optimized, physical layer
front-end attachment to USB host, peripheral and OTG devices.
It is ideal for use in portable electronic devices, such as mobile phones, digital still
cameras, digital video cameras, Personal Digital Assistants (PDAs) and digital audio
players. It allows USB Application-Specific Integrated Circuits (ASICs), Programmable
Logic Devices (PLDs) and any system chip set to interface with the physical layer of the
USB through a 12-pin interface.
The ISP1504 can interface to the link with digital I/O voltages in the range of 1.65 V to
3.6 V.
The ISP1504 is available in HVQFN32 package.
I
I
I
I
ISP1504A; ISP1504C
ULPI Hi-Speed Universal Serial Bus On-The-Go transceiver
Rev. 03 — 7 April 2008
Fully complies with:
Interfaces to host, peripheral and OTG device cores; optimized for portable devices or
system ASICs with built-in USB OTG device core
Complete Hi-Speed USB physical front-end solution that supports high-speed
(480 Mbit/s), full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s)
Complete USB OTG physical front-end that supports Host Negotiation Protocol (HNP)
and Session Request Protocol (SRP)
N
N
N
N
N
N
N
N
N
Universal Serial Bus Specification Rev. 2.0
On-The-Go Supplement to the USB 2.0 Specification Rev. 1.3
UTMI+ Low Pin Interface (ULPI) Specification Rev. 1.1
Integrated 45
device pull-up resistor, and 15 k
Integrated parallel-to-serial and serial-to-parallel converters to transmit and receive
USB clock and data recovery to receive USB data up to 500 ppm
Insertion of stuff bits during transmit and discarding of stuff bits during receive
Non-Return-to-Zero Inverted (NRZI) encoding and decoding
Supports bus reset, suspend, resume and high-speed detection handshake (chirp)
10 % high-speed termination resistors, 1.5 k
5 % host termination resistors
Product data sheet
5 % full-speed