CYV15G0201DXB-BBI Cypress Semiconductor Corp, CYV15G0201DXB-BBI Datasheet - Page 27

• Manufacturer Part Number: CYV15G0201DXB-BBI
• Manufacturer: Cypress Semiconductor Corp

Specifications of CYV15G0201DXB-BBI

• Lead Free Status / RoHS Status: Not Compliant

Document #: 38-02058 Rev. *H
Table 19. Receive Character Status when Channels are Operated in Independent Mode (RXMODE[1:0] = LL or H)
Table 20. Receive Character Status when Channels are Operated to Receive BIST Data
RXSTx[2:0]
RXSTx[2:0]
000
001
010
011
100
101
110
000
001
010
100
101
111
011
110
111
Priority
Priority
7
7
2
5
4
1
6
3
7
7
2
5
4
1
6
3
BIST Data Compare. Character compared correctly
BIST Command Compare. Character compared correctly
BIST Last Good. Last Character of BIST sequence detected and valid.
RESERVED for TEST
BIST Last Bad. Last Character of BIST sequence detected invalid.
BIST Start. Receive BIST is enabled on this channel, but character compares have not yet
commenced. This also indicates a PLL Out of Lock condition, and Elasticity Buffer
overflow/underflow conditions.
BIST Error. While comparing characters, a mismatch was found in one or more of the decoded
character bits.
BIST Wait. The receiver is comparing characters. but has not yet found the start of BIST character
to enable the LFSR.
Normal Character Received. The valid data character with the correct running disparity received
Special Code Detected. Special code other than the selected framing character or decoder
violation received
Receive Elasticity Buffer underrun/overrun
error. The receive elasticity buffer was not able to
add/drop a K28.5 or framing character.
Framing Character Detected. This indicates that a character matching the patterns identified as
a framing character was detected. The decoded value of this character is present on the associ-
ated output bus.
Codeword Violation. The character on the output bus is a C0.7. This indicates that the received
character cannot be decoded into any valid character.
PLL Out Of Lock Indication
Running Disparity Error. The character on the output bus is a C4.7, C1.7 or C2.7
INVALID
Type-A Status
(Receive BIST = Enabled)
Receive BIST Status
INVALID
CYW15G0201DXB
CYP15G0201DXB
CYV15G0201DXB
Type-B Status
Page 27 of 46
[+] Feedback