MMA7455LR2 Freescale, MMA7455LR2 Datasheet - Page 10

• Manufacturer Part Number: MMA7455LR2
• Manufacturer: Freescale

Specifications of MMA7455LR2

• Family Name: MMA7455L
• Package Type: LGA
• Operating Supply Voltage (min): 2.4V
• Operating Supply Voltage (typ): 2.8V
• Operating Supply Voltage (max): 3.6V
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Industrial
• Product Depth (mm): 3mm
• Product Height (mm): 1mm
• Product Length (mm): 5mm
• Mounting: Surface Mount
• Pin Count: 14
• Lead Free Status / RoHS Status: Compliant

LEVEL DETECTION
The user can access XYZ measurements and can use the level interrupt only. The level detection mechanism has no timers as-
sociated with it. Once a set acceleration level is reached the interrupt pin will go high and remain high until the interrupt pin is
cleared (See
By default all three axes are enabled and the detection range is 8g only. X and/or Y and/or Z can be disabled. There is a choice
between detecting an Absolute signal or a Positive or Negative only signal on the enabled axes. There is also a choice between
doing a detection for Motion where X or Y or Z > Threshold vs. doing a detection for Freefall where X & Y & Z < Threshold.
$18: Control 1 (Read/Write) Setting the Detection Axes for X, Y and Z
This allows the user to define how many axes to use for detection. All axes are enabled by default. To disable write 1.
XDA: Disable X
YDA: Disable Y
ZDA: Disable Z
$19: Control 2 (Read/Write) Motion Detection (OR Condition) or Freefall Detection (AND Condition
LDPL = 0: Level detection polarity is positive and detecting condition is OR for all 3 axes.
X or Y or Z > Threshold
||X|| or ||Y|| or ||Z|| > Threshold
LDPL = 1: Level detection polarity is negative detecting condition is AND for all 3 axes.
||X|| and ||Y|| and ||Z|| < Threshold
$18: Control 1 (Read/Write): Setting the threshold to be an integer value or an absolute value
This allows the user to set the threshold to be absolute, or to be based on the threshold value as positive or negative.
THOPT = 0 Absolute; THOPT = 1 Positive Negative
$1A: Level Detection Threshold Limit Value (Read/Write)
When an event is detected the interrupt pin (either INT1 or INT2) will go high. The interrupt pin assignment is set up in Register
$18, discussed in the
Source Register $0A.
LDTH[7:0]: Level detection threshold value. If THOPT bit in Detection Control Register is “0”, it is unsigned 7 bits value and
LDTH[7] should be “0”. If THOPT bit is “1”, it is signed 8 bits value.
10
MMA7455L
X and Y and Z < Threshold
LDTH[7]
DFBW
DFBW
D7
D7
D7
D7
0
--
0
0
0
Assigning, Clearing & Detecting
THOPT
LDTH[6]
THOPT
D6
D6
D6
D6
0
--
0
0
0
Assigning, Clearing & Detecting Interrupts
LDTH[5]
ZDA
ZDA
D5
D5
D5
D5
0
--
0
0
0
LDTH[4]
Interrupts).
YDA
YDA
D4
D4
D4
D4
--
0
0
0
0
LDTH[3]
XDA
XDA
D3
D3
D3
D3
0
--
0
0
0
section. The detection status is monitored by the Detection
INTREG[1]
INTREG[1]
LDTH[2]
DRVO
D2
D2
D2
D2
0
0
0
0
INTREG[0]
INTREG[0]
LDTH[1]
PDPL
D1
D1
D1
D1
0
0
0
0
Freescale Semiconductor
LDTH[0]
INTPIN
INTPIN
LDPL
D0
D0
D0
D0
)
0
0
0
0
Reg $1A
Function
Function
Function
Function
Reg $18
Reg $19
Reg $18
Default
Default
Default
Default
Sensors