STM32W108HBU6 STMicroelectronics, STM32W108HBU6 Datasheet - Page 135

• Manufacturer Part Number: STM32W108HBU6
• Manufacturer: STMicroelectronics

Specifications of STM32W108HBU6

• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Processing Unit: Microprocessor
• Operating Supply Voltage (min): 1.18V
• Operating Supply Voltage (typ): 1.25V
• Operating Supply Voltage (max): 1.32V
• Package Type: VFQFPN EP
• Pin Count: 40
• Mounting: Surface Mount
• Rad Hardened: No
• Lead Free Status / Rohs Status: Supplier Unconfirmed

STM32W108CB, STM32W108HB
Figure 47. Triggering timer 2 with update of timer 1
As in the previous example, both counters can be initialized before starting counting.
Figure 46
mode instead of gated mode (TIM_SMS = 110 in the TIM2_SMCR register).
Figure 48. Triggering timer 2 with enable of timer 1
Starting both timers synchronously in response to an external trigger
This example, sets the enable of Timer 1 when its TI1 input rises, and the enable of Timer 2
with the enable of Timer 1. Refer to
aligned, Timer 1 must be configured in master/slave mode (slave with respect to TI1, master
with respect to Timer 2):
●
●
●
Configure Timer 1 in master mode to send its Enable as trigger output (TIM_MMS =
001 in the TIM1_CR2 register).
Configure Timer 1 slave mode to get the input trigger from TI1 (TIM_TS = 100 in the
TIM1_SMCR register).
Configure Timer 1 in trigger mode (TIM_SMS = 110 in the TIM1_SMCR register).
shows the behavior with the same configuration shown in
Doc ID 16252 Rev 7
Figure 44
for connections. To ensure the counters are
General-purpose timers
Figure
47, but in trigger
135/208