LTM10C210 Toshiba, LTM10C210 Datasheet - Page 9

• Manufacturer Part Number: LTM10C210
• Manufacturer: Toshiba

Specifications of LTM10C210

• Lead Free Status / Rohs Status: Compliant

RELIABILITY TEST
Test Item
High Temperature Operation
High Temperature Storage
High Temperature
Low Temperature Operation
Low Temperature Storage
Temperature Shock
Mechanical Vibration
Mechanical Shock
TEST CONDITIONS
SPECIFICATIONS
High Humidity operation
Note 1) Operating
Note 2) Non-Operating
Definitions of failure for judgment shall be as follows:
The module shall have no failure in the following reliability test items.
1) The module should be driven and inspected under normal test conditions.
2) The module should not have condensation of water (moisture) on the module.
3) The module should be inspected after two or more hours storage in normal conditions (15 - 35 C,45 - 65%(RH)).
4) A module shall be used only for one test.
1) Function of the module should be maintained.
2) Current consumption should be smaller than the specified value.
3) Appearance and display quality should not have distinguished degradation.
4) Luminance should be larger than 50% of the minimum value specified in OPTICAL SPECIFICATION.
2)
2)
2)
1)
2)
2)
1)
1)
Test Conditions
10 - 200 - 10Hz sweep/cycle,
1.5 9.8m/s
X.Y.Z each directions, 0.5h each
50 9.8m/s
one time each
50 C 192 h
60 C 192 h
50 C 80% 192 h
-20 C 192 h
-20 C
0 C 192 h
0.5h
X, Y, Z direction,
50 cycles
0.5h
2
2
60 C
, 20ms,
constant,
(9/ 10 )
2003-11-27 (Ver.3.1R )
Result
OK 3p/3p
OK 3p/3p
OK 3p/3p
OK 3p/3p
OK 3p/3p
OK 3p/3p
OK 3p/3p
OK 3p/3p
LTM10C210