FHDFEET Intel, FHDFEET Datasheet - Page 28

• Manufacturer Part Number: FHDFEET
• Manufacturer: Intel

Specifications of FHDFEET

• Lead Free Status / Rohs Status: Supplier Unconfirmed

To ensure proper cooling, only processors with active heatsinks should be used unless otherwise
indicated in the server board manuals. Active heatsinks incorporate a fan to provide cooling. Such
a thermal solution is included with Intel
Air should flow through the system from front to back. The active processor cooling solution
validated with this chassis is called a Processor Wind Tunnel (PWT), and is provided with the Intel
Boxed Xeon Processors. Proper installation places the fan portion of the PWT over the front
edge of the chassis. The fans blow toward the rear of the chassis (toward I/O connectors). See
illustration below. Note the direction of the fan airflow.
18
450W power supply
80x25mm Fan
80x25mm Fan
PCI cards
Memory
Figure 17. Base Chassis Airflow Characteristics
Figure 16. Processor Wind Tunnel Illustration
80x32mm fans x2
®
Processors
with PWT
boxed processors.
Air Flow
Epak fan shroud
Other 5.25" Drive
Floppy Drive
CDROM drive
5 Hotswap Hard Drives
IDE drives
Revision 1.0
®