FHDFEET Intel, FHDFEET Datasheet - Page 44

• Manufacturer Part Number: FHDFEET
• Manufacturer: Intel

Specifications of FHDFEET

• Lead Free Status / Rohs Status: Supplier Unconfirmed

power supplies have the 24-pin SSI and 8-pin power connectors, and the 650-W also has the 5-pin
connector.
7.3
The following cables are provided as part of the chassis kit:
7.3.1
The intrusion alarm cable consists of two switches in a series which are normally open and are
depressed by the access cover and front bezel. It is cabled to the server board by 22AWG twisted-
pair wire terminated at a 2-pin connector.
7.3.2
A 34-conductor ribbon cable with 34-pin IDC* connectors links the front panel and SSI Revision
2.0-compliant server board (e.g., SHG2). Some boards may employ a 24-pin ribbon cable that
does not fully support all the features of the front panel.
7.3.3
A 10-conductor USB cable with 10-pin connectors is used for connecting the front panel- mounted
USB connector to the server board
7.3.4
The installed system fans provide 3-pin connectors designed to mate with SSI (ATX*)-compatible
fan headers. Hot-swap fans employ chassis-mounted adapter cables to provide a standard 3-pin
connector for the server board.
The following cables are also provided as part of the HSRP chassis kit:
7.3.5
A 68-conductor twisted-pair SCSI cable is provided to interface from the server board to the hot-
swap backplane (HSBP).
7.3.6
A 4-pin cable connects the server board to the HBSP to communicate server management
information, such as drive and fan status to the server board. Note that the server management
features will vary by server board.
7.4
Depending on the specific server board support of these features, some or all of the following
cables may not be included as part of the boxed board kit:
7.4.1
One or two 40-pin, 80-conductor DMA33/66/100 IDE cable.
34
Chassis Internal Cables
Server Board Internal Cables
Intrusion Alarm Switch cable
Front Panel cable
USB cable
Fan Connectors
SCSI cable
I
IDE cable
2
C cable
Revision 1.0