FHDFEET Intel, FHDFEET Datasheet - Page 47

• Manufacturer Part Number: FHDFEET
• Manufacturer: Intel

Specifications of FHDFEET

• Lead Free Status / Rohs Status: Supplier Unconfirmed

8.2
Major features of the SE7500CW2 server board include the following:
See the Intel
Revision 1.0
•
•
•
•
•
•
•
•
•
•
•
Intel
Dual Intel
400 MHz front side bus
Intel
Support for up to four DDR200 or DDR266-compliant ECC DDR DIMMs, providing up to 4
GB of memory.
Three separate and independent PCI buses:
Three external USB ports with an additional internal header providing one optional USB
ports for front panel support.
Two IDE connectors, supporting up to four ATA-100 compatible devices
Support for up to four system fans and two processor fans.
SSI-compliant connectors for SSI interface support: front panel and power connectors.
SE7500CW2 has the following connectors and switches: Serial x 2, Parallel, USB x 4,
keyboard, mouse, video, IDE x 2, ATA RAID x 2, LAN x 2 (100/10Base-T) x 1, DC On/Off
switch, Sleep switch, and Reset switch.
Low Pin Count (LPC) bus segment with two embedded devices:
-
-
-
-
-
-
-
-
-
®
®
®
E7500 server chipset
SE7500CW2 DP Server Board TPS on the support.intel.com website for more detail.
Memory Controller Hub (MCH) memory controller
P64H2 64-bit I/O Hub
ICH3-S I/O controller
Firmware Hub (FWH)
Segment A: 32-bit, 33 MHz, 5 V (P32-A) with four embedded devices:
Segment B: PCI-X 64-bit, 100 MHz, 3.3 V, (P64-B) supporting the following
configuration:
Segment C: PCI-X 64-bit, 133 MHz, 3.3 V (P64-C) supporting the following device:
Super I/O controller chip providing all PC-compatible I/O (floppy, serial, keyboard,
mouse) as well as integrated hardware monitoring via a Winbond* 83627HF
hardware monitor
Flash ROM device for system BIOS: Intel
SE7500CW2 Dual Processor Server Board
®
Xeon
2D/3D graphics controller: ATI Rage XL Video Controller with 8 MB of SDRAM
Two Intel
ATA-100 controller: Promise Technology* PDC20267
2 PCI I/O riser slot capable of supporting full length PCI add-in cards
Two PCI slots capable of supporting full length PCI add-in cards
Segment C: PCI-X 64-bit, 133 MHz, 3.3 V (P64-C) supporting the following device:
One PCI slot capable of supporting full length PCI add-in cards
One PCI slot capable of supporting full length PCI add-in cards
TM
processors using the Socket* 603/604 FCPGA2 package.
®
10/100 82550PM Fast Ethernet Controllers
®
8Mbit N82802AC flash ROM.
37