BOXD865PERL Intel, BOXD865PERL Datasheet - Page 41

no-image

BOXD865PERL

Manufacturer Part Number
BOXD865PERL
Description
Manufacturer
Intel
Datasheet

Specifications of BOXD865PERL

Lead Free Status / Rohs Status
Supplier Unconfirmed
1.11.3 LAN Subsystem Software
1.12 Hardware Management Subsystem
1.12.1.1
Table 8.
LAN software and drivers are available from Intel’s World Wide Web site.
The hardware management features enable the Desktop Board D865PERL to be compatible with
the Wired for Management (WfM) specification. The Desktop Board D865PERL has the
following hardware management features:
The features of the hardware monitoring and fan control ASIC (Standard Microsystems
SMSC EMC6D101 or equivalent) include:
For information about
Obtaining LAN software and drivers
For information about
The WfM specification
For information about
The location of the fan connectors and sensors for thermal monitoring
The Standard Microsystems SMSC EMC6D101
LED
Left
Right
Fan monitoring and control (through the I/O controller or the hardware monitoring and fan
control ASIC)
Thermal and voltage monitoring
Chassis intrusion detection
Internal ambient temperature sensor
Two remote thermal diode sensors for direct monitoring of processor temperature and ambient
temperature sensing
Power supply monitoring of five voltages (+5 V, +12 V, +3.3 V Standby, +1.5 V, and +VCCP)
to detect levels above or below acceptable values
Thermally monitored closed-loop fan control, for all three fans, that can adjust the fan speed or
switch the fans on or off as needed
SMBus interface
Hardware Monitoring and Fan Control ASIC
Color
Green
Green
Orange
LAN Connector LED States
LED State
Off
On (steady state)
On (brighter and pulsing)
Off
On
On
Condition
LAN link is not established.
LAN link is established.
The computer is communicating with another computer
on the LAN.
10 Mbit/sec data rate is selected.
100 Mbit/sec data rate is selected.
1000 Mbit/sec data rate is selected.
Refer to
Figure 16, page 42
http://www.smsc.com
Refer to
Section 1.2, page 16
Refer to
Section 1.4, page 17
Product Description
41