9-1393792-7 TE Connectivity, 9-1393792-7 Datasheet - Page 215

• Manufacturer Part Number: 9-1393792-7
• Description: Electromechanical Relay DPDT 3A 12VDC 720Ohm Through Hole
• Manufacturer: TE Connectivity
• Type: Signal Relayr

Specifications of 9-1393792-7

• Contact Arrangement: DPDT
• Dc Coil Voltage: 12 V
• Coil Current: 16.67 mA
• Mounting: Through Hole
• Relay Construction: Non-Latching
• Coil Voltage Dc: 12V
• Contact Form: 2 Form C
• Voltage Rating (vdc): 220V
• Voltage Rating (vac): 250V
• Dropout Volt (min): 0.6VDCV
• Coil Resistance: 720Ohm
• Pick-up Voltage (max): 8.4VDC
• Maximum Power Rating: 60W/125VA
• Operate Time: 5ms
• Contact Current Rating: 3A
• Contact Material: AgNi/Au
• Coil Suppression Diode: No
• Push To Test Button: No
• Led Indicator: No
• Seal: Unsealed
• Product Height (mm): 11mm
• Product Depth (mm): 10mm
• Product Length (mm): 20.2mm
• Operating Temp Range: -25C to 85C
• Pin Count: 8
• Mounting Style: Through Hole
• Termination Style: PC Pin
• Package / Case: DIP
• Lead Free Status / Rohs Status: Compliant

Dimensions are shown for
reference purposes only.
Ambient Temperature vs. Coil Voltage - 1 Watt Coil
Data below are average values and should be verified in application. Tests
were conducted within a 2' (.6 m) cube (still air); at nominal coil power @
25 C; with normally open contact loaded; and with 4' (1.22 m) long, #10
AWG load wires. P.C. board relays were mounted to a 30A, single side P.C.
board
Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.
Ordering Information
T9AP1D52-9
T9AP1D52-12
T9AP5D52-12
T9AP5D52-24
T9AS1D12-12
T9AS1D12-18
1. Basic Series:
2. Enclosure:
3. Contact Arrangement:
4. Coil Input:
5. Mounting & Termination:
6. Contact Material:
7. Coil Voltage:
a) Only available with enclosure code “S” & “V”.
140
120
100
140
120
100
140
120
100
T9A = Low cost, printed circuit board/panel power relay.
P = Unsealed, plastic dust cover (mounting code 5).
S = Immersion cleanable, knock off nib, sealed plastic case (mounting codes 1 & 2).
V = Vented, flux-tight (mounting code 1).
1 = 1 Form A (SPST-NO).
D = DC voltage (1 Watt)
1 = Printed circuit board mounting; PC terminals for coil & contacts
2 = Printed circuit board mounting; PC terminals for coil & contacts, and .250" (6.35mm) quick connects for contacts
5 = Flanged mounting; .187" (4.75mm) quick connects for coil and .250" (6.35mm) quick connects for contacts
2 = Silver-cadmium oxide.
5 = 5VDC
9 = 9VDC
80
60
40
20
80
60
40
20
80
60
40
0
0
(6)
60
60
60
.
Sealed Relay, Vented
Load Connections Via Q.C. Terminals,
PC Mount
Sealed Relay, Vented
PC Terminals For Coil & Contacts
Relay With Dust Cover,
Flange Mount
Applied Continuous Coil Voltage (% of Rated Voltage)
Applied Continuous Coil Voltage (% of Rated Voltage)
Applied Continuous Coil Voltage (% of Rated Voltage)
80
80
80
T9AS1D12-24
T9AS1D12-48
T9AS1D22-12
T9AS1D22-24
T9AS5D12-12
T9AS5D12-24
12 = 12VDC
18 = 18VDC
100
100
(note 3)
100
(note 3)
5 = 1 Form C (SPDT).
L = DC voltage (900mW)
;
120
120
T9AS5D22-12
T9AS5D22-24
T9AV1L22-24
120
Dimensions are in inches over
(millimeters) unless otherwise
specified.
24 = 24VDC
48 = 48VDC
b) Only available with enclosure code “S”.
140
140
140
160
160
Typical Part Number
160
110 = 110VDC
(a)
.
180
Catalog 1308242
180
180
10A
0A
10A
20A
30A
0A
20A
30A
Issued 3-03
10A
0A
20A
30A
Environmental Data
Storage Temperature Range: -55 C to 130 C.
Operating Temperature Range
Vibration, Operational: 0.065" (1.65mm) max. excursions from 10-55 Hz.
Shock, Operational: 10g for 11 ms with no contact opening >100 s.
Shock, Mechanical: 100g.
Mechanical Data
Termination: Printed circuit and quick connect terminals
Enclosures (all have 94V-0 flammability rating):
Weight: Q.C. version: 1.2 oz. (33g) approx. (mounting code 2 & 5).
Notes
(1) Operating ambient temperature must consider “Must Operate Voltage
(2) Sealed relay terminals should not be bent.
(3) Remove knock-off nib after cleaning process for optimum life of sealed
(4) Maximum soldering temperature is 500 F for 4 seconds.
(5) Class F coils are UL systems approved for maximum coil temperature of
(6) See application note 13C265 for proper relay mounting, termination,
B T9A
Change Over Temperature,” Contact Temperature Rise, Coil Temperature
Rise (If coil is not allowed to cool) and Maximum Coil Temperature.
Specification ambient considers 20A load with coil cooled to ambient.
relays.
140 C, by change of resistance method.
cleaning and PC board conductor width. Coil rise test performed with 30A
PC board to maintain 20 C maximum rise @ 30A.
T9AP: Unsealed, plastic dust cover.
T9AS: Immersion cleanable, sealed plastic case
T9AV: Vented, flux-tight, plastic cover.
c) Only available with enclosure code “P”.
Specifications and availability
subject to change.
Sealed Model T9AS: 0.9 oz. (26g) approx. (mounting code 1).
S
(c)
with no contact opening >100 s.
.
5
(b)
.
(1)
: -55 C to +85 C.
D
2
(2 & 3)
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
(4)
.
2
.
-12
P&B
507