9-1393792-7 TE Connectivity, 9-1393792-7 Datasheet - Page 355

• Manufacturer Part Number: 9-1393792-7
• Description: Electromechanical Relay DPDT 3A 12VDC 720Ohm Through Hole
• Manufacturer: TE Connectivity
• Type: Signal Relayr

Specifications of 9-1393792-7

• Contact Arrangement: DPDT
• Dc Coil Voltage: 12 V
• Coil Current: 16.67 mA
• Mounting: Through Hole
• Relay Construction: Non-Latching
• Coil Voltage Dc: 12V
• Contact Form: 2 Form C
• Voltage Rating (vdc): 220V
• Voltage Rating (vac): 250V
• Dropout Volt (min): 0.6VDCV
• Coil Resistance: 720Ohm
• Pick-up Voltage (max): 8.4VDC
• Maximum Power Rating: 60W/125VA
• Operate Time: 5ms
• Contact Current Rating: 3A
• Contact Material: AgNi/Au
• Coil Suppression Diode: No
• Push To Test Button: No
• Led Indicator: No
• Seal: Unsealed
• Product Height (mm): 11mm
• Product Depth (mm): 10mm
• Product Length (mm): 20.2mm
• Operating Temp Range: -25C to 85C
• Pin Count: 8
• Mounting Style: Through Hole
• Termination Style: PC Pin
• Package / Case: DIP
• Lead Free Status / Rohs Status: Compliant

Features
• 40A continuous contact rating @ 85°C.
• 1 Form A and 1 Form C arrangements.
• PC board terminals.
• Available as open frame or sealed relay.
• Choice of AgNi 0.15 or AgSnO contacts.
Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT).
Material: AgNi 0.15 – Recommended for inductive loads.
Max. Switching Rate:20 operations per second with no contact load.
Max. Switching Voltage: 75VDC
Max. Load Current (@ 14VDC Load Voltage):
Max. Switching Power: 50-500 watts DC (voltage dependent)
Min. Recommended Current: 1 amp @ 12VDC.
Initial Voltage Drop: 200 millivolts, maximum, for normally open contacts
Expected Life: 10 million operations, mechanical; 100,000 operations at 40
Initial Dielectric Strength
Between Contacts and Coil: 500V rms.
Dimensions are shown for
reference purposes only.
All parametric, environmental and life tests are performed according to EIA
Standard RS-407-A at standard test conditions (23°C Ambient, 20-50% RH,
29.5 ± 1.0" Hg.) unless otherwise noted.
Contact Data
Coil Data
Voltage: 12 and 24VDC.
Resistance: See Coil Data table.
Nom. Power: 1.6 watts @ 23°C coil temp. and rated coil voltage.
Thermal Resistance: 45°C per actual coil watt in still air with no contact
Coil Data (@ 23°C Coil Temperature)
Conditions
Max. Continuous
Designator
Current
Max. Break Current
Max. Make Current
Coil
AgSnO – Recommended for high inrush, lamp and capacitive loads
and applications prone to contact material transfer.
F
H
AgNi 0.15
AgSnO
Load
amps, 14VDC, resistive load on normally open contact.
Open Frame
Sealed Cover
@ 40 amp contact load.
250 millivolts, maximum, for normally closed contacts
@ 20 amp contact load.
load current.
6 operations per minute for rated life at rated load.
Rated Coil
(1)
(2)
Voltage
(VDC)
12
24
(1)
.
Form A
100A
180A
(NO)
45A
45A
60A
±10% (Ohms)
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Resistance
Coil
362
90
100A
180A
45A
45A
60A
NO
Form C
(1)
Inductance
.
(H) (Ref.)
30A
30A
30A
30A
30A
Coil
NC
0.6
2.3
Catalog 1308242
Issued 3-03
Must-Operate
Specifications and availability
subject to change.
Must Operate and Must Release Voltage: See Coil Data table.
Initial Operate Time:5 milliseconds, typical, with rated coil voltage applied.
Initial Release Time: 3 milliseconds, typical, with zero volts applied (for
Environmental Data
Temperature Range: Storage: -40°C to +155°C.
Shock: 20g, 11 milliseconds, half sine wave pulse.
Vibration: (For NC contacts, NO contacts are significantly higher.)
Mechanical Data
Termination: Printed circuit terminals.
Enclosure: Sealed relay is suitable for immersion cleaning of PCB
Weight: 20g (0.7 oz.) approximately.
Abnormal Operation
Overload Current: Consult factory.
24V Jump Start: 24VDC for 5 minutes conducting rated contact
Drop Test: Capable of meeting specifications after a 1.0 meter drop onto
Flammability: UL94-HB or better, internal parts (meets FMVSS 302).
(1) See Figure 1.
(2) Inrush current for lamp load.
(3) Allowable overdrive is rated at ambient temperature for 23°C or 85°C
(4) See Figure 2.
(5) Current and times are compatible with circuit protection by a typical
Operate Data
Notes
VKP
Compact, 40 Amp,
Open or Sealed
PC Board Relay
For Automotive Applications
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that users also seek out the pertinent approvals files of
the agencies/laboratories and review them to ensure the product meets the
requirements for a given application.
Voltage
(VDC)
as stated with no load current flowing through the relay contacts and
minimum coil resistance. Also see Figure 2 for maximum ambient
temperature versus applied coil voltage.
automotive circuit breaker. Relay will make, carry and break the
specified current.
13.9
6.8
10-40 Hz., 1.27mm double amplitude.
40-70 Hz., 5g's constant.
70-100 Hz., 0.5mm double amplitude.
100-500 Hz., 10g's constant.
concrete in final enclosure.
assembly or conformal coating. Relay may be vented after
cleaning by cutting the vent projection from the corner of the
relay after processing using a razor knife or equivalent.
series
current @ 23°C.
Must-Release
unsuppressed relays after having been energized at
rated coil voltage).
Operating: -40°C to +125°C
Voltage
(VDC)
2.4
1.2
@ 23°C
19.6
39.3
TYCO ELECTRONICS
(4)
Allowable
Overdrive
.
(VDC)
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
(3)
@ 85°C
14.3
28.6
1007