EP2C5F256C8N Altera, EP2C5F256C8N Datasheet - Page 43

• Manufacturer Part Number: EP2C5F256C8N
• Description: IC CYCLONE II FPGA 5K 256-FBGA
• Manufacturer: Altera
• Series: Cyclone® IIr

Specifications of EP2C5F256C8N

• Number Of Logic Elements/cells: 4608
• Number Of Labs/clbs: 288
• Total Ram Bits: 119808
• Number Of I /o: 158
• Voltage - Supply: 1.15 V ~ 1.25 V
• Mounting Type: Surface Mount
• Operating Temperature: 0°C ~ 85°C
• Package / Case: 256-FBGA
• No. Of Logic Blocks: 288
• Family Type: Cyclone II
• No. Of I/o's: 158
• I/o Supply Voltage: 3.3V
• Operating Frequency Max: 320MHz
• Operating Temperature Range: 0°C To +85°C
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of Gates: -
• Other names: 544-1656

Altera Corporation
February 2007
Clock Modes
Table 2–8
memory.
Table 2–9
when configured in the different memory modes.
M4K Routing Interface
The R4, C4, and direct link interconnects from adjacent LABs drive the
M4K block local interconnect. The M4K blocks can communicate with
LABs on either the left or right side through these row resources or with
LAB columns on either the right or left with the column resources. Up to
16 direct link input connections to the M4K block are possible from the
left adjacent LAB and another 16 possible from the right adjacent LAB.
M4K block outputs can also connect to left and right LABs through each
16 direct link interconnects.
array interface.
Independent
Input/output
Read/write
Single
Independent
Input/output
Read/write
Single clock
Table 2–8. M4K Clock Modes
Clock Mode
Table 2–9. Cyclone II M4K Memory Clock Modes
Clocking Modes
summarizes the different clock modes supported by the M4K
shows which clock modes are supported by all M4K blocks
In this mode, a separate clock is available for each port (ports A
and B). Clock A controls all registers on the port A side, while
clock B controls all registers on the port B side.
On each of the two ports, A or B, one clock controls all registers
for inputs into the memory block: data input, wren, and address.
The other clock controls the block’s data output registers.
Up to two clocks are available in this mode. The write clock
controls the block’s data inputs, wraddress, and wren. The
read clock controls the data output, rdaddress, and rden.
control all registers of the memory block. Asynchronous clear
signals for the registers are not supported.
In this mode, a single clock, together with clock enable, is used to
True Dual-Port
Mode
v
v
v
Figure 2–17
Cyclone II Device Handbook, Volume 1
Simple Dual-Port
Description
shows the M4K block to logic
Mode
v
v
v
Cyclone II Architecture
Single-Port Mode
v
v
2–31