VQ1301N-51 SMC Corporation, VQ1301N-51 Datasheet - Page 22

• Manufacturer Part Number: VQ1301N-51
• Description: SOLENOID VALVE, BASE MT, 5 PORT, PLUG-IN TYPE, 24VDC, 3 POSITION CLOSED CENTER
• Manufacturer: SMC Corporation
• Type: Solenoidr

Specifications of VQ1301N-51

• Brand/series: VQ Series
• Configuration: 3-Position Closed Center
• Enclosure Rating: IP65
• Fluid Type: Air/Inert Gas
• Number Of Ports: 5
• Pressure, Operating: 0.7 MPa
• Primary Type: Solenoid Valve
• Temperature, Ambient: –10° to +50°C
• Valve Type: 5-Port Solenoid, Plug-In, Base Mounted with 3 Position Closed Center Actuation, Rubber Seal, Negative Common
• Voltage, Coil: 24 VDC

b
b
b
b
Flat Ribbon Cable (26 Pins)
How to Order Manifold
21
Note 1) Other than the above model, 10P, 16P, 20P are also available. Refer to page 55 for details.
Note 2) Lengths other than the above are also available. Please contact SMC for details.
02
24
AXT100-FC26-
P
Maximum stations are 24.
electrical connection.
Using the connector for flat ribbon cable (26P) conforming to
MIL standard permits the use of connectors put on the market
and gives a wide interchangeability.
Top or side receptacle position can be selected in accordance
with the available mounting space.
1
2
MIL flat ribbon cable connector reduces installation labor for
Flat ribbon cable connector assembly can be ordered individually or
included in a specific manifold model no. Refer to “How to Order Manifold.”
1
VV5Q
Stations
Series
24 stations
Connector manufacturers’ example
Manifold
2 stations
• Hirose Electric Co., Ltd.
• Sumitomo 3M Limited
Note) Refer to
VQ1000
VQ2000
Plug-in unit
Note 1) Insert “L” (Top ported) or “B” (Bottom ported) for elbow type.
Note 2) Indicate “LM” for models with elbow fittings and mixed cylinder port sizes.
Note 3) Indicate “Mixed sizes and with port plug” by means of the manifold specifica-
Note 4) When selecting the mixed size for different types of piping, dual flow fitting
Note 5) Inch-size one-touch fittings are available. Refer to “Semi-standard” on page
page 56
for details.
Series
Flat Ribbon Cable Connector Assembly
kit (Flat ribbon cable)
Cable length (
For other commercial connectors, use a 26 pins type with strain relief
conforming to MIL-C-83503.
Cannot be used for transfer wiring.
to
Example) B6 (Bottom ported elbow with ø6 one-touch fitting)
tion sheet.
assembly, or double check block (direct mounting), enter “MM” and give
instructions in the manifold specification sheet.
57 for details.
1
3
1.5 m
3 m
5 m
1
CM
MM
Cylinder port
Symbol
1
M5
C3
C4
C6
C8
L
Note 3)
)
Note 4)
VQ1000/2000
• Fujitsu Limited
• Japan Aviation Electronics
Industry, Ltd.
Assembly part no.
08 C6
Mixed sizes and with port plug
Mixed size for different types of piping, option installed
AXT100-FC26-1
AXT100-FC26-2
AXT100-FC26-3
With ø3.2 one-touch fitting
With ø4 one-touch fitting
With ø6 one-touch fitting
With ø8 one-touch fitting
Connector entry
U
S
M5 thread
Port size
direction
Side entry
Top entry
P
U 1
Cable 26 cores
x 28AWG
VQ1000 VQ2000
• J.S.T. Mfg. Co., Ltd.
• Oki Electric Cable Co., Ltd.
Note
Cable Assembly
Red
DC specification only
CE compliant
Cable (Length)
0
1
2
3
Manifold Specifications
Nil
Q
With cable (1.5 m)
VQ1000
VQ2000
Note 1) When two or more symbols are specified, indicate them alphabetically. Example) -BRS
Note 2) Models with a suffix “-B” have check valves for prevention of back pressure at all
Note 3) The number of stations that may be displayed is longer than the manifold number of
Note 4) Specify the mounting position by means of the manifold specification sheet.
Note 5) Refer to page 69 for details on with ejector unit. A combination of “J” and “N” is not
Note 6) Specify the wiring specifications by means of the manifold specification sheet.
Note 7) Indicate “R” for the valve with external pilot.
With cable (3 m)
With cable (5 m)
Series
Without cable
CE compliant
b
manifold stations. When a back pressure check valve is desired, and is to be instal-
led only in certain manifold stations, specify the mounting position by means of the
manifold specification sheet.
stations.
available.
—
VV5Q11
direction
Piping
Side
Side
The total number of stations is tabulated starting
from one on the D-side.
D„
G1
G2
G3
J„
B
K
R
Option
Symbol
Piping specifications
D0
Nil
Note 2)
Note 6)
Note 7)
D
N
S
Note 4)
Note 4)
Note 4)
Note 5)
Note 3)
1(P), 3(R)
C10
C8
Special wiring specifications
Direct EXH outlet with built-in silencer
With back pressure check valve
With DIN rail bracket (Without DIN rail)
DIN rail length specified
2 sets of regulator unit
3 sets of regulator unit
(Except double wiring)
(„: Stations 02 to 24)
1 set of regulator unit
Port size
DIN rail mounting
With name plate
With ejector unit
External pilot
C3, C4, C6, M5
C4, C6, C8
Option
4(A), 2(B)
None
VV5Q21
VV5Q11
VV5Q21
Max. 24 stations
Max. 24 stations
VQ1000 VQ2000
Applicable
stations