VQ1301N-51 SMC Corporation, VQ1301N-51 Datasheet - Page 82

• Manufacturer Part Number: VQ1301N-51
• Description: SOLENOID VALVE, BASE MT, 5 PORT, PLUG-IN TYPE, 24VDC, 3 POSITION CLOSED CENTER
• Manufacturer: SMC Corporation
• Type: Solenoidr

Specifications of VQ1301N-51

• Brand/series: VQ Series
• Configuration: 3-Position Closed Center
• Enclosure Rating: IP65
• Fluid Type: Air/Inert Gas
• Number Of Ports: 5
• Pressure, Operating: 0.7 MPa
• Primary Type: Solenoid Valve
• Temperature, Ambient: –10° to +50°C
• Valve Type: 5-Port Solenoid, Plug-In, Base Mounted with 3 Position Closed Center Actuation, Rubber Seal, Negative Common
• Voltage, Coil: 24 VDC

Removing
1. Loosen the clamp
2. Lift side (a) of the
Mounting
1. Hook side (b) of
2. Press down side
Wiring connection for models conforming to IP65 should also
have enclosures equivalent to or of stricter than IP65.
Back page 5
screw on side (a)
of the end plate
on both sides.
manifold base and
slide the end plate
in the direction of
(2) shown in the
figure to remove.
the manifold base
on the DIN rail.
(a) and mount the
end plate on the
DIN rail. Tighten
the clamp screw
on side (a) of the
end plate. The
proper tightening
torque for screws
is 0.4 to 0.6 N·m.
Caution
Caution
How to Mount/Remove DIN Rail
End plate
Series
Specific Product Precautions 3
Be sure to read before handling.
Refer to back pages 1 and 2 for Safety Instructions and Handling Precautions for SMC
Products (M-E03-3) for 3/4/5 Port Solenoid Valves Precautions.
IP65 Enclosure
(2)
Hook
(1)
(b)
(1) (a)
VQ1000/2000
(2)
(a)
A filter element is incorporated in the end plate on both sides of
the maifold base. A dirty and choked element may reduce cylin-
der speed or cause malfunction. Clean or replace the dirty ele-
ment.
Element Part No.
The minimum order quantity is 10 pcs.
Remove the cover from the
top of the end plate and
remove the old element with
a flat head screwdriver, etc.
Refer to Best Pneumatics No. q for obtaining the flow rate.
Built-in silencer,
direct exhaust
Caution
Type
How to Calculate Flow Rate
Built-in Silencer Element
VVQ1000-82A-1
VQ1000
Element part no.
VVQ2000-82A-1
VQ2000