VQ1301N-51 SMC Corporation, VQ1301N-51 Datasheet - Page 79

• Manufacturer Part Number: VQ1301N-51
• Description: SOLENOID VALVE, BASE MT, 5 PORT, PLUG-IN TYPE, 24VDC, 3 POSITION CLOSED CENTER
• Manufacturer: SMC Corporation
• Type: Solenoidr

Specifications of VQ1301N-51

• Brand/series: VQ Series
• Configuration: 3-Position Closed Center
• Enclosure Rating: IP65
• Fluid Type: Air/Inert Gas
• Number Of Ports: 5
• Pressure, Operating: 0.7 MPa
• Primary Type: Solenoid Valve
• Temperature, Ambient: –10° to +50°C
• Valve Type: 5-Port Solenoid, Plug-In, Base Mounted with 3 Position Closed Center Actuation, Rubber Seal, Negative Common
• Voltage, Coil: 24 VDC

Limited warranty and Disclaimer/Compliance Requirements
The product used is subject to the following “Limited warranty and Disclaimer” and “Compliance
Requirements”.
Read and accept them before using the product.
Limited warranty and Disclaimer
Compliance Requirements
1. The product is provided for use in manufacturing industries.
1. The warranty period of the product is 1 year in service or 1.5 years after the product is deliv-
2. For any failure or damage reported within the warranty period which is clearly our responsibility,
3. Prior to using SMC products, please read and understand the warranty terms and disclaimers
When the product is exported, strictly follow the laws required by the Ministry of Economy, Trade
and Industry (Foreign Exchange and Foreign Trade Control Law).
The product herein described is basically provided for peaceful use in manufacturing industries.
If considering using the product in other industries, consult SMC beforehand and exchange specifications or a
contract if necessary.
If anything is unclear, contact your nearest sales branch.
ered.
Also, the product may have specified durability, running distance or replacement parts. Please
consult your nearest sales branch.
a replacement product or necessary parts will be provided.
This limited warranty applies only to our product independently, and not to any other damage
incurred due to the failure of the product.
noted in the specified catalog for the particular products.
3) Vacuum pads are excluded from this 1 year warranty.
A vacuum pad is a consumable part, so it is warranted for a year after it is delivered.
Also, even within the warranty period, the wear of a product due to the use of the vacuum pad or failure due to the
deterioration of rubber material are not covered by the limited warranty.
3)
Safety Instructions
Caution
Back page 2