DS2148T+ Maxim Integrated Products, DS2148T+ Datasheet - Page 37

• Manufacturer Part Number: DS2148T+
• Description: IC LIU E1/T1/J1 5V 44-TQFP
• Manufacturer: Maxim Integrated Products
• Type: Line Interface Units (LIUs)r

Specifications of DS2148T+

• Number Of Drivers/receivers: 1/1
• Protocol: T1/E1/J1
• Voltage - Supply: 4.75 V ~ 5.25 V
• Mounting Type: Surface Mount
• Package / Case: 44-TQFP, 44-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

RIR1 (08H): RECEIVE INFORMATION REGISTER 1
(MSB)
SYMBOL
ZD
(latched)
(latched)
(latched)
(latched)
(latched)
(latched)
RUA1C
RCLC
16ZD
JALT
HBD
N/A
N/A
ZD
16ZD
POSITION
RIR1.7
RIR1.6
RIR1.5
RIR1.4
RIR1.3
RIR1.2
RIR1.1
RIR1.0
HBD
DESCRIPTION
Zero Detect. Set when a string of at least four (ETS = 0) or
eight (ETS = 1) consecutive zeros (regardless of the length of
the string) have been received. Will be cleared when read.
Sixteen Zero Detect. Set when at least 16 consecutive zeros
(regardless of the length of the string) have been received. Will
be cleared when read.
HDB3/B8ZS Word Detect. Set when an HDB3 (ETS = 0) or
B8ZS (ETS = 1) code word is detected independent of whether
the receive HDB3/B8ZS mode (CCR4.6) is enabled. Will be
cleared when read. Useful for automatically setting the line
coding.
Receive Carrier Loss Clear. Set when the RCL alarm has met
the clear criteria defined in Error! Reference source not
found.. Will be cleared when read.
Receive Unframed All Ones Clear. Set when the unframed all
ones signal is no longer detected. Will be cleared when read.
See Error! Reference source not found..
Jitter Attenuator Limit Trip. Set when the jitter attenuator
FIFO reaches to within 4 bits of its useful limit. Will be cleared
when read. Useful for debugging jitter attenuation operation.
Not Assigned. Could be any value when read.
Not Assigned. Could be any value when read.
RCLC
37 of 73
RUA1C
JALT
N/A
(LSB)
N/A