IDT82V2044EPFG8 IDT, Integrated Device Technology Inc, IDT82V2044EPFG8 Datasheet - Page 42

• Manufacturer Part Number: IDT82V2044EPFG8
• Description: IC LINE INTERFC UNIT 4CH 128TQFP
• Manufacturer: IDT, Integrated Device Technology Inc
• Type: Line Interface Units (LIUs)r

Specifications of IDT82V2044EPFG8

• Protocol: E1
• Voltage - Supply: 3.13 V ~ 3.47 V
• Mounting Type: Surface Mount
• Package / Case: 128-TQFP, 128-VQFP
• Screening Level: Industrial
• Mounting: Surface Mount
• Package Type: TQFP
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of Drivers/receivers: -
• Lead Free Status / RoHS Status: Compliant, Lead free / RoHS Compliant
• Other names: 800-1863-2; 82V2044EPFG8

QUAD CHANNEL T1/E1/J1 SHORT HAUL LINE INTERFACE UNIT
4.2.5
Table-35 MAINT0: Maintenance Function Control Register 0
Table-36 MAINT1: Maintenance Function Control Register 1
PRBS_INV
PATT_CLK
PATT[1:0]
Symbol
Symbol
ATAO
ARLP
AISE
LAC
RLP
DLP
ALP
NETWORK DIAGNOSTICS CONTROL REGISTERS
-
-
(R/W, Address = 0AH,4AH,8AH,CAH)
(R/W, Address = 0BH,4BH,8BH,CBH)
6-5
7-4
Bit
Bit
4
3
2
0
7
3
2
1
0
1
Default
Default
0000
00
0
0
0
0
0
0
0
0
0
0
Selects reference clock for transmitting internal pattern
Reserved
These bits select the internal pattern and insert it into the transmit data stream.
= 00: normal operation (PATT_CLK = 0) / insert all zeros (PATT_CLK = 1)
= 01: insert All Ones
= 10: insert PRBS (E1: 2
= 11: insert programmable Inband Loopback activate or deactivate code
= 0: uses TCLKn as the reference clock
= 1: uses MCLK as the reference clock
Inverts PRBS
= 0: PRBS data is not inverted
= 1: PRBS data is inverted before transmission and detection
The LOS/AIS criterion is selected as below:
= 0: G.775 (E1) / T1.231 (T1/J1)
= 1: ETSI 300233 & I.431 (E1) / I.431 (T1/J1)
AIS enable during LOS
= 0: AIS insertion on RDPn/RDNn/RCLKn is disabled during LOS
= 1: AIS insertion on RDPn/RDNn/RCLKn is enabled during LOS
Automatically Transmit All Ones (enabled only when PATT[1:0] = 01)
= 0: disabled
= 1: Automatically Transmit All Ones pattern at TTIPn/TRINGn during LOS.
Reserved
Automatic Remote Loopback Control
= 0: disables Automatic Remote Loopback (normal transmit and receive operation)
= 1: enables Automatic Remote Loopback
Remote loopback enable
= 0: disables remote loopback (normal transmit and receive operation)
= 1: enables remote loopback
Analog loopback enable
= 0: disables analog loopback (normal transmit and receive operation)
= 1: enables analog loopback
Digital loopback enable
= 0: disables digital loopback (normal transmit and receive operation)
= 1: enables digital loopback
15
-1) or QRSS (T1/J1: 2
42
20
Description
Description
-1)
TEMPERATURE RANGES
INDUSTRIAL