SU2200RMXLTNET APC, SU2200RMXLTNET Datasheet - Page 28

• Manufacturer Part Number: SU2200RMXLTNET
• Description: UPS - Uninterruptible Power Supplies APC Smart-UPS XL 2200VA RM 5U 208V
• Manufacturer: APC

Specifications of SU2200RMXLTNET

• Power Rating: 1600 W
• Output Voltage Rating: 208 V
• Number Of Outlets: 5
• Interface Port: DB-9 RS-232, SmartSlot
• Runtime (full Load): 10 min
• Runtime (half Load): 34 min
• Topology: Online
• Tower / Rackmount: Rackmount
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Install the Output Panel
1. Slide the output panel into position as shown in Figure 5-14. In-
2. Make sure there are a few inches of slack output cable tucked in-
3. Tighten the cable clamp. The clamp will prevent strain on the con-
Install the Input Panel
1. Slide the input panel into position as shown in Figure 5-14. Fasten
2. Make sure there are a few inches of slack input cable tucked inside
3. Tighten the cable clamp. The clamp will prevent strain on the con-
26
stall the circuit breaker by pushing it through the hole in the out-
put panel until it snaps into place. Fasten the panel to the UPS
with two self-locking panel screws.
side the unit.
nections if the output cable is accidentally pulled.
the panel to the UPS with two self-locking panel screws.
the unit.
nections if the input cable is accidentally pulled.