5962-9201001MXC Cypress Semiconductor Corp, 5962-9201001MXC Datasheet - Page 17

• Manufacturer Part Number: 5962-9201001MXC
• Manufacturer: Cypress Semiconductor Corp

Specifications of 5962-9201001MXC

• Lead Free Status / Rohs Status: Not Compliant

DSCC FORM 2234
1/
2/
3/
4/
5/
6/
7/
8/
9/
10/ Read operation only.
11/ Master write post only.
12/ Skew.
13/ VMEbus interrupt only.
14/ Local interrupt (LICR[4] = 1) only.
15/ Local interrupt (LICR[4] = 0) only.
16/ A 60/40 to 40/60 duty cycle must be maintained.
APR 97
All testing to be performed using worst-case test conditions. The following pins are active low:
CS, PAS, DSACK0, LBG, IPL1, IPL2, BLT, DSACK1, LBERR, W, RMC, IRESET, ABEN, LIACKO, DEDLK, RESET,
HALT, LBR, SCON, LIRQ2, IPL0, LIRQ5, LIRQ1, UWDENIN, LIRQ4, LIRQ3, LWDENIN, SWDEN, LIRQ6, LIRQ7, DENO,
ISOBE, SLSEL1, ICFSEL, WORD, MWB, SLSEL0, FCIACK, BG0OUT, BG1OUT, IRQ1, BG2IN, BG3OUT, IRQ2, IRQ5,
SYSFAIL, IACKIN, BERR, BR2, BBSY, BG0IN, BG3IN, BG2OUT, IRQ3, IRQ6, SYSRESET, IACK, AS, DS, LWORD,
WRITE, DS1, BR1, BR3, BG1IN, IRQ4, IRQ7, ACFAIL, IACKOUT, DTACK, DS0, BR0, BCLR.
VMEbus signals (Low Drive, all VMEbus Daisy Chain Signals) and all non-VMEbus signals.
VMEbus signals (AS, DS1, DS0, BCLR, SYSCLK) and VMEbus signals (Medium Drive, all non-High, non-Low Drive
Signals).
Tested initially and at process and design changes. Thereafter guaranteed, if not tested, to the limits specified in table I.
ROR mode.
While VMEbus system controller.
Synchronous delay depends on speed in which BGiIN is returned. If BGiIN is returned in zero time after request,
synchronous delay will be maximum.
Write operation only.
While VMEbus master.
DEFENSE SUPPLY CENTER COLUMBUS
MICROCIRCUIT DRAWING
COLUMBUS, OHIO 43216-5000
STANDARD
TABLE I. Electrical performance characteristics - Continued.
SIZE
A
REVISION LEVEL
B
SHEET
5962-92010
17