F10-S30R Omron, F10-S30R Datasheet - Page 12

• Manufacturer Part Number: F10-S30R
• Description: 25C4243
• Manufacturer: Omron

Specifications of F10-S30R

• Sensing Range: 90mm To 110mm
• Peak Reflow Compatible (260 C): No
• Terminal Type: Wire Leaded
• Supply Current Max: 150mA
• Supply Voltage Max: 19.8VDC
• Sensor Terminals: Cable
• Leaded Process Compatible: No
• Rohs Compliant: No

F10
1. Pattern Registration (TEACH Mode)
Use the following procedure to register measurement criteria.
(1) Set the mode selector to TEACH.
(2) Make the automatic teaching and model size settings on the DIP switch.
(3) Set the measurement item/bank number selection switch to PATT/BANK. Bank No. 0 will be displayed.
(4) Press the UP/DOWN select buttons to set the bank number.
(5) Use the measurement item (bank number) selection switch to set the measurement method.
(6) Press the teach/display button after locating the sensing object in the sensing area.
Setting Procedure
If using an F10-C30/C35/C50/C55, go to step (3) to set the bank number. If using an F10-C20/C25, go to step (5).
Measurement Items: PATT/BANK
Not fit for
a model
Optimum
for a
model
Locate the sensing object in the
sensing area so that the degree
of suitability for a model will be
indicated.
Checking the degree of
suitability of the model
8
7
6
5
4
3
2
1
Press the
teach/display
button.
The level indicators are all
lit for 0.5 s and the buzzer
sounds twice.
Teaching successful
8
7
6
5
4
3
2
1
POINT
Buzzer
sounds
The threshold indicators all flash
while the buzzer sounds four times.
The deviation level is insufficient.
Change the location of the Sensor
and try again.
Banks
Each F10-C30/C35/C50/C55 Sensor
has eight banks for storing data, and a
different threshold value can be stored in
each of the eight banks. Use this func-
tion to take measurements under vari-
ous conditions. You can switch operation
simply by switching banks.
Teaching unsuccessful
8
7
6
5
4
3
2
1
Buzzer
sounds
F10
19