F10-S30R Omron, F10-S30R Datasheet - Page 18

• Manufacturer Part Number: F10-S30R
• Description: 25C4243
• Manufacturer: Omron

Specifications of F10-S30R

• Sensing Range: 90mm To 110mm
• Peak Reflow Compatible (260 C): No
• Terminal Type: Wire Leaded
• Supply Current Max: 150mA
• Supply Voltage Max: 19.8VDC
• Sensor Terminals: Cable
• Leaded Process Compatible: No
• Rohs Compliant: No

F10
Dimensions
Note:
F10-Cj
Buzzer
sounds
Control output (OUTPUT) and enable
output are OFF, and will not turn ON.
Amplifiers
All units are in millimeters unless otherwise indicated.
8
7
6
5
4
3
2
1
Problem
5.7-dia. 11-core vinyl-insulated round cable, standard length: 2 m
(Conductor cross-section: 0.2 mm
This LED of the threshold
indicators flashes and the
buzzer sounds three
times.
Mounting Dimensions
Serial buffer overflow error
Either the send buffer or receive buffer has
become full during communications.
A current exceeding the rated value has
flowed to the output transistor and the
overcurrent protective circuit has been
triggered.
2
, insulator diameter: f 1.0 mm).
Probable cause
2-M4
Send buffer overflow
Change the communications settings.
Receive buffer overflow
Wait for a response from the F10, then
send the command.
Reduce the current so that it will not
exceed the rated value.
Note: If the output does not turn ON even
after reducing the current below the rated
value, contact your OMRON
representative.
Remedy
F10-C50/C55 only
F10
25