PIC18F4585-H/P Microchip Technology, PIC18F4585-H/P Datasheet - Page 295

• Manufacturer Part Number: PIC18F4585-H/P
• Description: IC MCU 8BIT 48KB FLASH 40PDIP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F4585-H/P

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: CAN, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 36
• Program Memory Size: 48KB (24K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 3.25K x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 11x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 150°C
• Package / Case: 40-DIP (0.600", 15.24mm)
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

REGISTER 23-21: RXERRCNT: RECEIVE ERROR COUNT REGISTER
EXAMPLE 23-5:
© 2007 Microchip Technology Inc.
; Need to read a pending message from RXB0 buffer.
; To receive any message, filter, mask and RXM1:RXM0 bits in RXB0CON registers must be
; programmed correctly.
;
; Make sure that there is a message pending in RXB0.
BTFSS
BRA
; We have verified that a message is pending in RXB0 buffer.
; If this buffer can receive both Standard or Extended Identifier messages,
; identify type of message received.
BTFSS
BRA
; Read all 29-bits of Extended Identifier message.
...
; Now read all data bytes
MOVFF
...
; Once entire message is read, mark the RXB0 that it is read and no longer FULL.
BCF
...
bit 7-0
RXB0CON, RXFUL
NoMessage
RXB0SIDL, EXID
StandardMessage
RXB0DO, MY_DATA_BYTE1
RXB0CON, RXFUL
READING A CAN MESSAGE
bit 7
REC7:REC0: Receive Error Counter bits
This register contains the receive error value as defined by the CAN specifications.
When RXERRCNT > 127, the module will go into an error-passive state. RXERRCNT does not
have the ability to put the module in “bus-off” state.
Legend:
R = Readable bit
-n = Value at POR
REC7
R-0
REC6
R-0
PIC18F2585/2680/4585/4680
W = Writable bit
‘1’ = Bit is set
REC5
R-0
Preliminary
; Does RXB0 contain a message?
; No.
; Is this Extended Identifier?
; No.
; Yes.
; This will allow CAN Module to load new messages
; into this buffer.
Handle this situation...
This is Standard Identifier message.
This is Extended Identifier message.
REC4
R-0
REC3
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
R-0
REC2
R-0
x = Bit is unknown
REC1
R-0
DS39625C-page 293
REC0
R-0
bit 0