SC16C750BIB64,157 NXP Semiconductors, SC16C750BIB64,157 Datasheet - Page 11

• Manufacturer Part Number: SC16C750BIB64,157
• Description: IC UART 64BYTE 64LQFP
• Manufacturer: NXP Semiconductors

Specifications of SC16C750BIB64,157

• Number Of Channels: 1, UART
• Package / Case: 64-LQFP
• Fifo's: 64 Byte
• Voltage - Supply: 2.5V, 3.3V, 5V
• With Auto Flow Control: Yes
• With False Start Bit Detection: Yes
• With Modem Control: Yes
• With Cmos: Yes
• Mounting Type: Surface Mount
• Data Rate: 3 Mbps
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 2.25 V
• Supply Current: 4.5 mA
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Operating Supply Voltage: 2.5 V or 3.3 V or 5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 935274403157; SC16C750BIB64; SC16C750BIB64

NXP Semiconductors
SC16C750B_5
Product data sheet
6.5 Programmable baud rate generator
The SC16C750B supports high speed modem technologies that have increased input
data rates by employing data compression schemes. For example, a 33.6 kbit/s modem
that employs data compression may require a 115.2 kbit/s input data rate. A 128.0 kbit/s
ISDN modem that supports data compression may need an input data rate of 460.8 kbit/s.
A single baud rate generator is provided for the transmitter and receiver, allowing
independent TX/RX channel control. The programmable baud rate generator is capable of
accepting an input clock up to 48 MHz, as required for supporting a 3 Mbit/s data rate.
The SC16C750B can be configured for internal or external clock operation. For internal
clock oscillator operation, an industry standard microprocessor crystal (parallel resonant,
22 pF to 33 pF load) is connected externally between the XTAL1 and XTAL2 pins (see
Figure
internal baud rate generator for standard or custom rates (see
The generator divides the input 16 clock by any divisor from 1 to (2
SC16C750B divides the basic crystal or external clock by 16. The frequency of the
BAUDOUT output pin is exactly 16 (16 times) of the selected baud rate
(BAUDOUT = 16 Baud Rate). Customized baud rates can be achieved by selecting the
proper divisor values for the MSB and LSB sections of baud rate generator.
Programming the baud rate generator registers DLM (MSB) and DLL (LSB) provides a
user capability for selecting the desired final baud rate. The example in
selectable baud rates when using a 1.8432 MHz crystal.
For custom baud rates, the divisor value can be calculated using
divisor in decimal
Fig 5.
5). Alternatively, an external clock can be connected to the XTAL1 pin to clock the
Crystal oscillator connection
=
Rev. 05 — 17 October 2008
XTAL1
XTAL1 clock frequency
--------------------------------------------------------------- -
1.8432 MHz
serial data rate 16
C1
22 pF
X1
XTAL2
C2
33 pF
5 V, 3.3 V and 2.5 V UART with 64-byte FIFOs
XTAL1
1.8432 MHz
C1
22 pF
X1
XTAL2
002aaa870
Table
1.5 k
C2
47 pF
SC16C750B
Equation
16
5).
© NXP B.V. 2008. All rights reserved.
Table 5
1). The
1:
shows
11 of 44
(1)