ISD5008PY Nuvoton Technology Corporation of America, ISD5008PY Datasheet - Page 5

• Manufacturer Part Number: ISD5008PY
• Description: IC VOICE REC/PLAY 4-8MIN 28-DIP
• Manufacturer: Nuvoton Technology Corporation of America
• Series: ISD5008r

Specifications of ISD5008PY

• Interface: SPI/Microwire
• Filter Pass Band: 1.7 ~ 3.4kHz
• Duration: 4 ~ 8 Min
• Mounting Type: Through Hole
• Package / Case: 28-DIP (0.600", 15.24mm)
• For Use With: ISD-ES511 - EVALUATION SYSTEM FOR ISD5100ISD-ES501 - EVALUATION SYSTEM FOR ISD5008
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

1
1.1
The ISD5008 ChipCorder product can be config-
ured via software to operate at 4.0, 5.3, 6.4, and
8.0 kHz sampling frequencies, allowing the user a
choice of speech quality options. Increasing the
duration decreases the sampling frequency and
bandwidth, which affects sound quality. Table 1
compares filter pass band and product durations.
The speech samples are stored directly into on-chip
nonvolatile memory without the digitization and
compression associated with other solutions. Di-
rect analog storage provides a natural sounding
reproduction of voice, music, tones, and sound
effects not available with most solid-state solu-
tions.
1.2
To meet end system requirements, the ISD5008
device is a single-chip solution which provides
from 4 to 8 minutes of voice record and playback,
depending on the sample rates defined by cus-
tomer software.
Table 1:
ISD
Input Sample
Rate (kHz)
8.0
6.4
5.3
4.0
DETAILED DESCRIPTION
SPEECH/SOUND QUALITY
DURATION
Input Sample Rate to Duration
(Minutes)
Duration
4.0
5.0
6.0
8.0
Typical Filter Pass Band
(kHz)
3.4
2.7
2.3
1.7
1.3
One of the benefits of ISD’s ChipCorder technology
is the use of on-chip nonvolatile memory, which pro-
vides zero-power message storage. The message
is retained for up to 100 years (typically) without
power. In addition, the device can be re-record-
ed over 100,000 times (typically).
1.4
A four-wire (SCLK, MOSI, MISO, SS) SPI interface is
provided for ISD5008 control, addressing func-
tions, and sample rate selection. The ISD5008 is
configured to operate as a peripheral slave de-
vice with a microcontroller-based SPI bus inter-
face. Read/Write access to all the internal registers
occurs through this SPI interface. An interrupt sig-
nal (INT) and internal read-only Status Register are
provided for handshake purposes.
1.5
The ISD5008 series is also ideal for playback-only
applications, where single or multiple message
Playback is controlled through the SPI port. Once
the desired message configuration is created, du-
plicates can easily be generated via an ISD or
third-party programmers. For more information on
available application tools and programmers
please see the ISD web site at www.isd.com.
FLASH STORAGE
MICROCONTROLLER INTERFACE
PROGRAMMING
ISD5008 Product
1