SAM9263 Atmel Corporation, SAM9263 Datasheet - Page 26

• Manufacturer Part Number: SAM9263
• Manufacturer: Atmel Corporation

Specifications of SAM9263

• Flash (kbytes): 0 Kbytes
• Pin Count: 324
• Max. Operating Frequency: 240 MHz
• Cpu: ARM926
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 160
• Ext Interrupts: 160
• Usb Transceiver: 3
• Usb Speed: Full Speed
• Usb Interface: Host, Device
• Spi: 2
• Twi (i2c): 1
• Uart: 4
• Can: 1
• Ssc: 2
• Ethernet: 1
• Sd / Emmc: 2
• Graphic Lcd: Yes
• Video Decoder: No
• Camera Interface: Yes
• Resistive Touch Screen: No
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 96
• Self Program Memory: NO
• External Bus Interface: 2
• Dram Memory: sdram
• Nand Interface: Yes
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.8/3.3
• Fpu: No
• Mpu / Mmu: No / Yes
• Timers: 3
• Output Compare Channels: 3
• Input Capture Channels: 3
• Pwm Channels: 4
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: No

Introduction
1.1.3
1.1.4
1-4
Memory interface
EmbeddedICE Logic
The ARM7TDMI processor memory interface has been designed to allow performance
potential to be realized, while minimizing the use of memory. Speed-critical control
signals are pipelined to allow system control functions to be implemented in standard
low-power logic. These control signals facilitate the exploitation of the fast-burst access
modes supported by many on-chip and off-chip memory technologies.
The ARM7TDMI core has four basic types of memory cycle:
•
•
•
•
EmbeddedICE Logic is the additional hardware provided by debuggable ARM
processors to aid debugging. It allows software tools to debug code running on a target
processor. The EmbeddedICE Logic is controlled through the Joint Test Action Group
(JTAG) test access port, using the EmbeddedICE interface. See Chapter 5 Debug
Interface and Appendix B Debug in Depth for more information.
idle cycle
nonsequential cycle
sequential cycle
coprocessor register transfer cycle.
Copyright © 1994-2001. All rights reserved.
ARM DDI 0029G