SAM9M10 Atmel Corporation, SAM9M10 Datasheet - Page 561

• Manufacturer Part Number: SAM9M10
• Manufacturer: Atmel Corporation

Specifications of SAM9M10

• Flash (kbytes): 0 Kbytes
• Pin Count: 324
• Max. Operating Frequency: 400 MHz
• Cpu: ARM926
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 160
• Ext Interrupts: 160
• Usb Transceiver: 3
• Usb Speed: Hi-Speed
• Usb Interface: Host, Device
• Spi: 2
• Twi (i2c): 2
• Uart: 5
• Lin: 4
• Ssc: 2
• Ethernet: 1
• Sd / Emmc: 2
• Graphic Lcd: Yes
• Video Decoder: Yes
• Camera Interface: Yes
• Adc Channels: 8
• Adc Resolution (bits): 10
• Adc Speed (ksps): 440
• Resistive Touch Screen: Yes
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 64
• Self Program Memory: NO
• External Bus Interface: 2
• Dram Memory: DDR2/LPDDR, SDRAM/LPSDR
• Nand Interface: Yes
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.8/3.3
• Operating Voltage (vcc): 0.9 to 1.1
• Fpu: No
• Mpu / Mmu: No / Yes
• Timers: 6
• Output Compare Channels: 6
• Input Capture Channels: 6
• Pwm Channels: 4
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: No

SAM9M10
0: No LIN Identifier has been sent since the last RSTSTA.
– 1:At least one LIN Identifier has been sent since the last RSTSTA.If USART operates in LIN Slave Mode
(USART_MODE = 0xB):
0: No LIN Identifier has been received since the last RSTSTA.
1:At least one LIN Identifier has been received since the last RSTSTA
• LINTC: LIN Transfer Completed
0: The USART is idle or a LIN transfer is ongoing.
1: A LIN transfer has been completed since the last RSTSTA.
• CTSIC: Clear to Send Input Change Flag
0: No input change has been detected on the CTS pin since the last read of US_CSR.
1: At least one input change has been detected on the CTS pin since the last read of US_CSR.
• CTS: Image of CTS Input
0: CTS is at 0.
1: CTS is at 1.
• MANERR: Manchester Error
0: No Manchester error has been detected since the last RSTSTA.
1: At least one Manchester error has been detected since the last RSTSTA.
• LINBE: LIN Bit Error
0: No Bit Error has been detected since the last RSTSTA.
1: A Bit Error has been detected since the last RSTSTA.
• LINISFE: LIN Inconsistent Synch Field Error
0: No LIN Inconsistent Synch Field Error has been detected since the last RSTSTA
1: The USART is configured as a Slave node and a LIN Inconsistent Synch Field Error has been detected since the last
RSTSTA.
• LINIPE: LIN Identifier Parity Error
0: No LIN Identifier Parity Error has been detected since the last RSTSTA.
1: A LIN Identifier Parity Error has been detected since the last RSTSTA.
• LINCE: LIN Checksum Error
0: No LIN Checksum Error has been detected since the last RSTSTA.
1: A LIN Checksum Error has been detected since the last RSTSTA.
• LINSNRE: LIN Slave Not Responding Error
0: No LIN Slave Not Responding Error has been detected since the last RSTSTA.
1: A LIN Slave Not Responding Error has been detected since the last RSTSTA.
561
6355D–ATARM–7-Sep-11