LPC2930 NXP Semiconductors, LPC2930 Datasheet - Page 2

• Manufacturer Part Number: LPC2930
• Description: The LPC2930 combine an ARM968E-S CPU core with two integrated TCM blocksoperating at frequencies of up to 125 MHz, Full-speed USB 2
• Manufacturer: NXP Semiconductors

NXP Semiconductors
LPC2930_3
Product data sheet
Other peripherals:
Up to 152 general-purpose I/O pins with programmable pull-up, pull-down, or bus
keeper.
Vectored Interrupt Controller (VIC) with 16 priority levels.
Up to 22 level-sensitive external interrupt pins, including USB, CAN and LIN wake-up
features.
Processor wake-up from power-down via external interrupt pins, CAN, or LIN activity.
Configurable clock-out pin for driving external system clocks.
Flexible Reset Generator Unit (RGU) able to control resets of individual modules.
Flexible Clock-Generation Unit (CGU) able to control clock frequency of individual
modules:
Second, dedicated CGU with its own PLL generates USB clocks and a configurable
clock output.
Highly configurable system Power Management Unit (PMU):
Standard ARM test and debug interface with real-time in-circuit emulator.
Boundary-scan test supported.
ETM/ETB debug functions with 8 kB of dedicated SRAM also accessible for
application code and data storage.
Dual power supply:
208-pin LQFP package.
−40 °C to +85 °C ambient operating temperature range.
One 10-bit ADC with 5.0 V measurement range and eight input channels with
conversion times as low as 2.44 μs per channel.
Two 10-bit ADCs, 8-channels each, with 3.3 V measurement range provide an
additional 16 analog inputs with conversion times as low as 2.44 μs per channel.
Each channel provides a compare function to minimize interrupts.
Multiple trigger-start option for all ADCs: timer, PWM, other ADC, and external
signal input.
Four 32-bit timers each containing four capture-and-compare registers linked to
I/Os.
Four six-channel PWMs (Pulse-Width Modulators) with capture and trap
functionality.
Two dedicated 32-bit timers to schedule and synchronize PWM and ADC.
Quadrature encoder interface that can monitor one external quadrature encoder.
32-bit watchdog with timer change protection, running on safe clock.
On-chip very low-power ring oscillator; fixed frequency of 0.4 MHz; always on to
provide a Safe_Clock source for system monitoring.
On-chip crystal oscillator with a recommended operating range from 10 MHz to
25 MHz. PLL input range 10 MHz to 25 MHz.
On-chip PLL allows CPU operation up to a maximum CPU rate of 125 MHz.
Generation of up to 11 base clocks.
Seven fractional dividers.
clock control of individual modules.
allows minimization of system operating power consumption in any configuration.
CPU operating voltage: 1.8 V ± 5 %.
I/O operating voltage: 2.7 V to 3.6 V; inputs tolerant up to 5.5 V.
All information provided in this document is subject to legal disclaimers.
Rev. 03 — 16 April 2010
ARM9 microcontroller with CAN, LIN, and USB
LPC2930
© NXP B.V. 2010. All rights reserved.
2 of 98