PM5366-PI PMC-Sierra, Inc., PM5366-PI Datasheet - Page 15

• Manufacturer Part Number: PM5366-PI
• Description: HIGH DENSITY 84/63 CHANNEL VT/TU MAPPER AND M13 MULTIPLEXER
• Manufacturer: PMC-Sierra, Inc.

PRELIMINARY
DATASHEET
PMC-2010672
PROPRIETARY AND CONFIDENTIAL
• When configured to operate as a DS3 or E3 Framer, gapped transmit and
• DS3 or E3 Transmit clock source can be selected from either an external
• Provides a SONET/SDH Add/Drop bus interface with integrated VT1.5, TU-11,
• System side interface is an SBI bus.
• Provides a generic 8-bit microprocessor bus interface for configuration, control
• Provides a standard 5 signal P1149.1 JTAG test port for boundary scan board
• Low power 1.8V/3.3V CMOS technology. All pins are 5V tolerant.
• 324-pin fine pitch PBGA package (23mm x 23mm). Supports industrial
• Provides non-intrusive performance monitoring of either ingress or egress paths,
• Frames to DS-1 signals in SF, SLC96 and ESF formats.
• Frames to TTC JT-G.704 multiframe formatted J1 signals. Supports the
• Provides Red, Yellow, and AIS alarm integration.
• Supports RAI-CI and AIS-CI alarm detection and generation.
• Provides Inband Loopback Code detection.
receive clocks can be optionally generated for interface to link layer devices
which only need access to payload data bits.
oscillator or from the receive side clock (loop-timed).
VT2 and TU-12 mapper for T1and E1 streams. Also provides a DS3 mapper.
and status monitoring.
test purposes.
temperature range (-40
Each one of 84 T1 performance monitor sections:
as selected on a per-tributary basis.
alternate CRC-6 calculation for Japanese applications.
• Non-intrusive performance monitoring provided by the TEMAP-84 also
provides an HDLC interface with 128 bytes of buffering for terminating the
facility data link in either the ingress or egress paths, as selected on a per-
tributary basis.
ISSUE 1
o
C to 85
o
C) operation.
3
HIGH DENSITY 84/63 CHANNEL VT/TU MAPPER
AND M13 MULTIPLEXER
PM5366 TEMAP-84