S1D13700F01 Epson Electronics America, Inc., S1D13700F01 Datasheet - Page 49

• Manufacturer Part Number: S1D13700F01
• Description: Embedded Memory Graphics Lcd Controller
• Manufacturer: Epson Electronics America, Inc.

Epson Research and Development
Vancouver Design Center
bit 7
bits 3-0
Hardware Functional Specification
Issue Date: 2005/12/13
REG[01h] Horizontal Character Size Register
Address = 8001h
MOD
7
6
Default = 00h
In two-frame AC drive, the MOD period is twice the frame period. In 16-line AC drive,
MOD inverts every 16 lines. Although 16-line AC drive gives a more readable display,
horizontal lines may appear when using high LCD drive voltages or at high viewing angles.
The S1D13700F01 handles display data in 8-bit units, therefore characters larger than 8
pixels wide must be formed from 8-pixel segments. The following diagram shows an
example of a character requiring two 8-pixel segments where the remainder of the second
eight bits are not displayed. This also applies to the second screen layer. In graphics mode,
the normal character field is also eight pixels. If a wider character field is used, any
remainder in the second eight bits is not displayed.
MOD
This bit selects the AC frame drive waveform period. MOD is typically set to 1.
When this bit = 0, 16-line AC drive is selected.
When this bit = 1, two-frame AC drive is selected.
Horizontal Character Size (FX) bits [3:0]
These bits define the horizontal size, or width, of each character, in pixels.
Figure 10-4 Horizontal and Vertical Character Size Example
FY
Where:
REG[01h] bits 3-0 = Horizontal Character Size in pixels - 1
FX = horizontal character size in pixels (REG[01h] bits 3-0)
FY = vertical character size in pixels (REG[02h] bits 3-0)
Address A
8 bits
n/a
5
FX
Address B
8 bits
4
Revision 4.05
Non-display area
FY
3
8 bits
FX
Horizontal Character Size bits 3-0
8 bits
2
1
Read/Write
X42A-A-002-04
S1D13700F01
0
Page 49