NL10276AC30_09 NEC, NL10276AC30_09 Datasheet - Page 24

• Manufacturer Part Number: NL10276AC30_09
• Description: TFT COLOR LCD MODULE
• Manufacturer: NEC

6. PRECAUTIONS
6.1 MEANING OF CAUTION SIGNS
6.2 CAUTIONS
6.3 ATTENTIONS
6.3.1 Handling of the product
The following caution signs have very important meaning. Be sure to read "6.2 CAUTIONS", after
understanding this contents!
x Take hold of both ends without touch the circuit board when customer pulls out products (LCD
y Do not hook cables nor pull connection cables such as flexible cable and so on, for fear of damage.
z If customer puts down the product temporarily, the product puts on flat subsoil as a display side turns
{ Take the measures of electrostatic discharge such as earth band, ionic shower and so on, when
| The torque for mounting screws must never exceed 0.39N⋅m. Higher torque values might result in
} Do not press or rub on the sensitive display surface. If customer clean on the panel surface, NEC
~ Do not push-pull the interface connectors while the product is working, because wrong power sequence
Corporation recommends using the cloth with ethanolic liquid such as screen cleaner for LCD.
modules) from packing box. If customer touches it, products may be broken down or out of
adjustment, because of stress to mounting parts.
down.
customer deals with the product, because products may be damaged by electrostatic.
distortion of the bezel.
may break down the product.
∗ ∗ ∗ ∗ Pay attention to handling for the working backlight and IC! It may be over 35° ° ° ° C from
∗ ∗ ∗ ∗ Do not shock and press the LCD panel and the backlight. There will be in danger of
danger of an electric shock.
ambient temperature.
breaking, because they are made of glass. (Shock: To be not greater 294m/s
greater 11ms, Pressure: To be not greater 19.6N)
Do not touch HIGH VOLTAGE PART of the inverter while turn on. Customer will be in
operations.
operations.
This sign has the meaning that customer will be injured by himself, if customer has wrong
This sign has the meaning that customer will get an electrical shock, if customer has wrong
DOD-M-0578
NEC Corporation
2
and to be not
24/28