NL10276BC30-04F NEC, NL10276BC30-04F Datasheet - Page 23

• Manufacturer Part Number: NL10276BC30-04F
• Description: TFT COLOR LCD MODULE
• Manufacturer: NEC

(3) Cautions for the atmosphere
(4) Cautions for the module characteristics
(6) Other cautions
Liquid Crystal Display has the following specific characteristics. There are not defects or
malfunctions.
The ambient temperature may affect the optical characteristics of this module.
This module has cold cathode tube for backlight. Optical characteristics, like luminance or uniformity,
will be changed by the progress in time.
Uneven brightness and/or small spots may be observed depending on different display patterns.
(5) Cautions for assembling of an inverter
a. Please insert an insulation sheet between the inverter and the mold chassis when the inverter is
a. Dew drop atmosphere must be avoided.
b. Do not store and/or operate the LCD module in a high temperature and/or high humidity
c. This module uses cold cathode fluorescent lamps. Therefore, the life of lamps becomes short if the
d. Do not operate the LCD module in high magnetic field.
a. Do not apply any fixed patterns for a long time to the LCD module. It may cause image sticking.
b. This module has the retardation film which may cause the variation of the color hue in the different
c. The light vertical stripe may be observed depending on the display pattern. This is not defects nor
d. The noise from the inverter circuit may be observed in the luminance control mode. This is not
a. Do not disassemble and/or reassemble LCD module.
b. Do not readjust any variable resistors or switches in the module.
c. When returning the module for repair or etc., please pack the module properly to avoid any
Before insulation sheet is adopted, the material and the thickness of an insulation sheet should be
considered.
(Design example:
assembled to the mold chassis. If you do not insert the insulation sheet, electric discharge may occur
from the inverter to the module.
Please use the screen savers if the display pattern is fixed for a long time.
atmosphere. Storage in an anti-static pouch and under the room temperature atmosphere is
recommended.
module is operated in the low temperature environment.
viewing angles. The ununiformity may appear on the screen under the high temperature operation.
malfunctions.
defects nor malfunctions.
damages. We recommend using the original shipping packages.
Thickness of the inverter printed wiring board: t1.0
Thickness of the insulation sheet
Material
: t0.4
: Polyethylene terephtalate (UL class: 94V-0 )
NEC Corporation
DOD-M-0002
23/26