NL160120AC27_01 NEC, NL160120AC27_01 Datasheet - Page 44

• Manufacturer Part Number: NL160120AC27_01
• Description: TFT COLOR LCD MODULE
• Manufacturer: NEC

6. PRECAUTIONS
6.2 CAUTIONS
6.1 MEANING OF CAUTION SIGNS
6.3 ATTENTIONS
6.3.1 Handling of the product
understanding this contents!
The following caution signs have very important meaning. Be sure to read "6.2 CAUTIONS", after
x
y
z
{
|
}
~

Corporation recommends using the cloth with ethanolic liquid such as screen cleaner for LCD.
modules) from packing box. If customer touches it, products may be broken down or out of
adjustment, because of stress to mounting parts.
Do not hook cables nor pull connection cables such as flexible cable and so on, for fear of damage.
turns down.
customer deals with the product, because products may be damaged by electrostatic.
distortion of the bezel.
sequence may break down the product.
deficiency by a contact defective and damages. Pay attention to handling at the time of matching
connector connection and in the connection condition.
The torque for mounting screws must never exceed 0.39N
Take hold of both ends without touch the circuit board when customer pulls out products (LCD
If customer puts down the product temporarily, the product puts on flat subsoil as a display side
Do not press or rub on the sensitive display surface. If customer clean on the panel surface, NEC
Do not give the stress too much on interface connectors. The module may become function
Take the measures of electrostatic discharge such as earth band, ionic shower and so on, when
Do not push-pull the interface connectors while the product is working, because wrong power
∗ ∗ ∗ ∗
∗ ∗ ∗ ∗
∗ ∗ ∗ ∗
from ambient temperature.
they are made of glass. (Shock: To be not greater 294m/s
Pressure: To be not greater 19.6N )
shock.
Do not shock and press the LCD panel and the backlight! Danger of breaking, because
Pay attention to burn injury for the working backlight and IC! It may be over 35
Do not touch the lamp cables while turn on. Customer will be in danger of an electric
wrong operations.
wrong operations.
This sign has the meaning that customer will be injured by himself, if customer has
This sign has the meaning that customer will get an electrical shock, if customer has
DATA SHEET EN0558EJ1V0DS00
⋅
m. Higher torque values might result in
2
and to be not greater 11ms,
NL160120AC27-01
° ° ° °
C
44