NL160120AC27_01 NEC, NL160120AC27_01 Datasheet - Page 45

• Manufacturer Part Number: NL160120AC27_01
• Description: TFT COLOR LCD MODULE
• Manufacturer: NEC

6.3.2 Environment
6.3.3 Characteristics
6.3.4 Other
The following items are neither defects nor failures.
x
y
z
{
x
y
z
{
|
}
x
y
z
{
|
transportation, when customer returns it to NEC Corporation for repair and so on.
Do not operate in dewdrop atmosphere and corrosive gases.
Do not operate or store in high temperature or high humidity atmosphere. Keep the product in
antistatic pouch in room temperature, because of avoidance for dusts and sunlight, if customer
stores the product.
Do not operate in high magnetic field. Circuit boards may be broken down by it.
should be avoided, because it may change color or properties of the polarizer.
The LCD may be seemed luminance non-uniformity, flicker, vertical seam or small spot by display
patterns.
Optical characteristics (e.g. luminance, display uniformity, etc.) gradually is going to change
depending on operating time, and especially low temperature, because the LCD has cold cathode
fluorescent lamps.
saver, if the fixed pattern is displayed on the screen.
Optical characteristics may be changed by input signal timings.
The interference noise of input signal frequency for this product's signal processing board and
luminance control frequency of customer's backlight inverter may appear on a display. Set up
luminance control frequency of backlight inverter so that the interference noise does not appear.
All GND, GNDB, VDD and VDDB terminals should be used without a non-connected line.
Do not disassemble a product or adjust volume without permission of NEC Corporation.
Pay attention not to insert waste materials inside of products, if customer uses screwnails.
Pack the product with original shipping package, because of avoidance of some damages during
transported as the module becomes vertical. Otherwise, there is the fear that a display dignity
decreases by an impact or vibrations.
Use an original protection sheet on the product surface (polarizer). Adhesive type protection sheet
Response time, luminance and color may be changed by ambient temperature.
Do not display the fixed pattern for a long time because it may cause image sticking. Use a screen
Not only the module but also the equipment that used the module should be packed and
DATA SHEET EN0558EJ1V0DS00
NL160120AC27-01
45