S25FL008K Meet Spansion Inc., S25FL008K Datasheet - Page 3

• Manufacturer Part Number: S25FL008K
• Description: 8-mbit Cmos 3.0 Volt Flash Memory With 104-mhz Spi Serial Peripheral Interface Multi I/o Bus
• Manufacturer: Meet Spansion Inc.

Distinctive Characteristics
This document contains information on one or more products under development at Spansion Inc. The information is intended to help you evaluate this product. Do not design in
this product without contacting the factory. Spansion Inc. reserves the right to change or discontinue work on this proposed product without notice.
Architectural Advantages
 Single power supply operation
 Memory architecture
 Program
 Erase
 Cycling endurance
 Data retention
 Process technology
 Package option
S25FL008K
8-Mbit CMOS 3.0 Volt Flash Memory
with 104-MHz SPI (Serial Peripheral Interface) Multi I/O Bus
Data Sheet (Advance Information)
– Full voltage range: 2.7 to 3.6V read and write operations
– Uniform 4 KB sectors
– 256-byte page size
– Page Program (up to 256 bytes) in 0.7 ms (typical)
– Program operations are on a page by page basis
– Quad Page Programming
– Bulk erase function
– Uniform sector erase (4 KB)
– Uniform block erase (32 KB and 64 KB)
– Erase/Program Suspend and Resume
– 100,000 erase/program cycles typical
– 20-year data retention typical
– Manufactured on 0.09 µm process technology
– Industry Standard Pinouts
– 8-pin SO package (208 mils)
– 8-pin SO package (150 mils)
Publication Number S25FL008K_00
Revision 01
Performance Characteristics
 Speed
 Low Power Consumption
 Efficient “Continuous Read Mode”
Memory Protection Features
 Advanced security features
– Normal READ (Serial): 50 MHz clock rate
– FAST_READ (Serial): 104 MHz clock rate (maximum)
– 104 MHz Dual SPI/Quad SPI Clocks
– 208/416 MHz equivalent Dual/Quad SPI
– 50 MB/s continuous data transfer rate
– 4 mA active current, 1 µA in Deep Power-down mode (typical)
– Industrial temperature range (–40°C to +85°C)
– Low Instruction overhead
– Continuous Read with 8/16/32/64-Byte Wrap
– As few as 8 clocks to address memory
– Allows true XIP (execute in place) operation
– Software and Hardware Write-Protect
– Top/Bottom, 4 KB complement array protection
– Power Supply Lock-Down and OTP protection
– 64-Bit Unique ID for each device
– Discoverable Parameters (SFDP) Registers
– 3x 256-Byte Security Registers with OTP locks
– Volatile & Non-volatile Status Register Bits
Issue Date July 30, 2010