saf7129ah NXP Semiconductors, saf7129ah Datasheet - Page 48

• Manufacturer Part Number: saf7129ah
• Description: Saf7129ah Digital Video Encoder
• Manufacturer: NXP Semiconductors

Philips Semiconductors
10.2
Time t
and insert it into the CVBS and VBS output signal, such
that it appears at t
(NTSC) after the leading edge of the horizontal
synchronization pulse.
Time t
source that is gated by TTXRQ in order to deliver TTX
data. This delay is programmable by register TTXHD.
For every active HIGH state at output pin TTXRQ, a new
teletext bit must be provided by the source (new protocol)
or a window of TTXRQ going HIGH is provided and the
number of teletext bits, depending on the chosen teletext
standard, is requested at input pin TTX (old protocol).
Since the beginning of the pulses representing the TTXRQ
signal and the delay between the rising edge of TTXRQ
2004 Mar 16
handbook, full pagewidth
Digital video encoder
CVBS/Y
TTX
TTXRQ (new)
TTXRQ (old)
FD
PD
Teletext timing
is the time needed to interpolate input data TTX
is the pipeline delay time introduced by the
TTX
text bit #:
= 9.78 s (PAL) or t
t PD
t TTX
1
2
t FD
3
4
TTX
5
= 10.5 s
6
Fig.23 Teletext timing.
7
8
9 10 11 12 13 14
48
and valid teletext input data are fully programmable
(TTXHS and TTXHD), the TTX data is always inserted at
the correct position after the leading edge of outgoing
horizontal synchronization pulse.
Time t
TTX data; it has a constant length that allows insertion of
360 teletext bits at a text data rate of 6.9375 Mbits/s (PAL),
296 teletext bits at a text data rate of 5.7272 Mbits/s (WST)
or 288 teletext bits at a text data rate of 5.7272 Mbits/s
(NABTS). The insertion window is not opened if the control
bit TTXEN is logic 0.
Using appropriate programming, all suitable lines of the
odd field (TTXOVS and TTXOVE) plus all suitable lines of
the even field (TTXEVS and TTXEVE) can be used for
teletext insertion.
i(TTXW)
t i(TTXW)
is the internally used insertion window for
15
16 17 18 19 20 21 22 23
SAF7129AH
Product specification
MHB504
24