adm6996f Infineon Technologies Corporation, adm6996f Datasheet - Page 8

• Manufacturer Part Number: adm6996f
• Description: 6 Port 10/100 Mb/s Single Chip Ethernet Switch Controller
• Manufacturer: Infineon Technologies Corporation

ADM6996F
Infineon-ADMtek Co Ltd
1.2
1.3
Features
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Applications
ADM6996F in 128-pin PQFP:
Supports four 10M/100M auto-detect Half/Full duplex switch ports with TX/FX
interfaces and two MII/GPSI ports.
Supports 2048 MAC addresses table.
Supports four queue for QoS
Supports priority features by Port-Based, 802.1p VLAN & IP TOS of packets.
Supports Store & Forward architecture and performs forwarding and filtering at non-
blocking full wire speed.
Supports buffer allocation with 256 bytes per block
Supports Aging function Enable/Disable.
Supports per port Single/Dual color mode with Power On auto diagnostic.
Supports 802.3x Flow Control pause packet for Full Duplex in case buffer is full.
Supports Back Pressure function for Half Duplex operation in case buffer is full.
Supports packet lengths up to 1522 bytes.
Broadcast Storming Filter function.
Supports 802.1Q VLAN. Up to 16 VLAN groups are implemented by the last four
bits of VLAN ID.
2bit MAC clone to support multiple WAN application
Supports TP interface Auto MDIX function for auto TX/RX swap by strapping-pin.
Easy Management 32bits smart counter for per port RX/TX byte/packet count, error
count and collision count.
Supports PHY status output for management system.
25M Crystal only for the whole system.
128 QFP package with 0.18um technology. 1.8V/3.3V power supply.
SOHO 5-port switch
5-port switch + Router with MII CPU interface.
Product Review
1-2