saa6752hs NXP Semiconductors, saa6752hs Datasheet - Page 23

• Manufacturer Part Number: saa6752hs
• Description: Mpeg-2 Video And Mpeg-audio/ac-3 Audio Encoder With Multiplexer
• Manufacturer: NXP Semiconductors

Philips Semiconductors
7.4
7.4.1
The audio input interface (I
data and supports master and slave mode. The interface
is able to handle 16 to 20 bits audio data with left and right
channel. Audio data with more than 20-bit word width is
accepted as input, but the additional bits are ignored.
7.4.2
The following configuration options can be selected from
the host:
7.4.3
The digital audio input interface can select between two
digital audio input ports via I
input the following audio formats:
2004 Jan 26
AUDIO INPUT PORT SELECTION. Two digital audio
input ports are selectable.
AUDIO INPUT FORMAT. Various I
can be selected.
AUDIO INPUT MODES. Master or slave mode can be
selected.
AUDIO CLOCK OUTPUT. An audio clock output
(256
analog-to-digital converter clocking.
AUDIO OUTPUT. The second audio interface port can
be configured as output in special applications e.g.
concurrent encoding of audio and video without internal
multiplexing of the two streams.
I
EIAJ, see Fig.6
EIAJ alternative format.
MPEG-2 video and MPEG-audio/AC-3
audio encoder with multiplexer
2
S, see Fig.5
Digital audio input
G
A
I
48 kHz or 384
NPUT FORMATS
UDIO PORT CONFIGURATION OPTIONS
ENERAL
48 kHz) can be used for external
2
S) accepts serial digital audio
2
C-bus control and is able to
2
S and EIAJ formats
23
The alternative formats are defined as having the word
select shifted by one clock cycle with respect to the data.
EIAJ and EIAJ alternative format are supported for 16, 18
and 20-bit resolution. I
supported for 16, 18, 20 and 24-bit resolution. Input data is
truncated to 20 bits internally if 24-bit resolution is applied.
Each of the formats can be applied in master or slave
mode.
When in master mode, the external audio analog-to-digital
convertor must be clocked using the audio clock
generated by the SAA6752HS. This can be set to
256
In slave mode an internal sample rate converter converts
the input sample frequency to a video frame locked 48 kHz
sample frequency.
If video is not present and/or the clock mode is set to
mode 3, the audio clock frequency is locked to the fixed
nominal system frequency (crystal or external). In all other
cases the audio clock will be locked to the video frame
frequency.
48 kHz or 384
2
48 kHz.
S and I
2
S alternative format are
SAA6752HS
Product specification