sc16c652-04 NXP Semiconductors, sc16c652-04 Datasheet - Page 11
![no-image](/images/manufacturer_photos/0/4/487/nxp_semiconductors_sml.jpg)
sc16c652-04
Manufacturer Part Number
sc16c652-04
Description
Sc16c652 Dual Uart With 32 Bytes Of Transmit And Receive Fifos
Manufacturer
NXP Semiconductors
Datasheet
1.SC16C652-04.pdf
(41 pages)
Philips Semiconductors
9397 750 11634
Product data
6.8 Programmable baud rate generator
The SC16C652 supports high speed modem technologies that have increased input
data rates by employing data compression schemes. For example, a 33.6 kbit/s
modem that employs data compression may require a 115.2 kbit/s input data rate.
A 128.0 kbit/s ISDN modem that supports data compression may need an input
data rate of 460.8 kbit/s. The SC16C652 can support a standard data rate of
921.6 kbit/s.
A single baud rate generator is provided for the transmitter and receiver, allowing
independent TX/RX channel control. The programmable Baud Rate Generator is
capable of operating with a frequency of up to 80 MHz. To obtain maximum data rate,
it is necessary to use full rail swing on the clock input. The SC16C652 can be
configured for internal or external clock operation. For internal clock oscillator
operation, an industry standard microprocessor crystal is connected externally
between the XTAL1 and XTAL2 pins. Alternatively, an external clock can be
connected to the XTAL1 pin to clock the internal baud rate generator for standard or
custom rates (see
The generator divides the input 16 clock by any divisor from 1 to 2
SC16C652 divides the basic external clock by 16. The basic 16 clock provides table
rates to support standard and custom applications using the same system design.
The rate table is configured via the DLL and DLM internal register functions.
Customized Baud Rates can be achieved by selecting the proper divisor values for
the MSB and LSB sections of baud rate generator.
Programming the Baud Rate Generator Registers DLM (MSB) and DLL (LSB)
provides a user capability for selecting the desired final baud rate. The example in
Table 6
external clock input.
Fig 3. Crystal oscillator connection.
shows the selectable baud rate table available when using a 1.8432 MHz
Table
Rev. 04 — 20 June 2003
C1
47 pF
1.8432 MHz
X1
6).
Dual UART with 32 bytes of transmit and receive FIFOs
C2
100 pF
1.8432 MHz
C1
22 pF
© Koninklijke Philips Electronics N.V. 2003. All rights reserved.
X1
1.5 k
C2
47 pF
SC16C652
002aaa169
16
1. The
11 of 41